Touch Panel Operation Overview
English
7
❒Notes on the Touch Panel
Before operation
¡Clean the surface of the touch panel. (a Operating Instructions)
Operation
¡Use only your fingers to operate the touch panel. ¡Do not press the panel forcefully.
¡Do not scratch the panel with fingernails or any hard objects.
¡Do not use a pen or other sharp implements to operate the touch panel.
¡Do not bump the front panel.
aFailure to observe the above may damage or break the glass on the surface of the touch panel.
The State of Operation Screen
Example: CD Changer
Note:
¡The following picture is partly darkened for explanation.
¡Displaying contents and their positions partly vary with each mode. Refer to the description of each mode for details.
Display Button
(a next page)
Source Button | Menu Button |
(Content varies with each |
|
source) |
|
Displays the Source Selection Screen. | Displays the Menu Screen. |
Source Selection Screen
Menu Screen
Source Selection Screen appears. Touch desired source button.
Touch 
to quit.
Press [SRC] to change to desired mode.
Note:
Menu Screen appears. Select desired setting.
Menu Setting, (a Operating Instructions)
Press [MENU] to let Menu
Screen appear.
¡When an 
, 
, 
or 
is connected to this unit without involving the Expansion Module (CY- EM100N, option), any of them appears at the AV2 position.
¡When 
is selected on the condition that the Expansion Module is connected to this unit, the video and audio of the source connected to AUDIO IN/VIDEO IN of the Expansion Module come out.
8