Panasonic CF-W4 Series manual Open the display, Connect your computer to a power outlet

Page 17

4 Open the display.

APress and hold the latch (B) located at the front.

BLift open the display.

z Do not open the display wider than necessary (140° or more), and do not apply excessive pressure to the LCD. Do not open or close the computer holding the edge of the LCD segment. Hold the C (below) segment to open or close the computer.

5 Connect your computer to a power outlet.

zBe sure the AC adaptor is connected until completing the first-time use operation.

zThe battery pack will be charged automatically.

Charging Time: Approx. 5 hours (Power off), Approx. 6.5 hours (Power on) (Varies depending on the usage conditions.)

zWhen using the computer for the first time, do not connect any peripheral device except the battery pack and AC adaptor to the computer.

CAUTION

Handling the AC adaptor

zDo not subject the AC adaptor to any strong impact.

Using the AC adaptor after a strong impact such as being dropped may result in electrocution, short circuit, or fire.

zUse only the specified AC adaptor with your computer. Using an AC adaptor other than the one supplied might damage the battery and/or the computer.

zProblems such as sudden voltage drops may arise during periods of thunder and lightning. Since this could adversely affect your computer, an uninterrupt- ible power source (UPS) is highly recommended unless running from the battery pack alone.

Preparations

6 Turn your computer on.

zSlide the power switch and hold it for approximately one second until the power indicator turns on before releasing it.

CAUTION

zDo not slide the power switch and hold it for more than four seconds; this will cause the power to be turned off forcibly.

zDo not slide the power switch repeatedly.

zDo not press any keys or touch the touch pad, until [Windows XP Professional Setup] is displayed.

zDo not change the Setup Utility until completing step 7. If you do so, Windows setup may not operate properly.

17

Image 17
Contents Personal Computer Model No. CF-W4 Series Copyright Disclaimer Trademarks IntroductionFor U.S.A Read Me FirstIndustry Canada IC Notice for modem Read Me FirstFor Canada Industry Canada DVD-ROM & CD-R/RW Drive Caution Lithium BatteryCompliance Notice CE Mark For EuropeDeclaration of Conformity DoC ‹Handling Precautions‹Usage Hold the plug when unplugging the AC cord Clean the DC plug of dust and other debris regularlyDo not turn the volume up to loud when using headphones Do not pull or insert the DC plug if your hands are wetPrecautions Battery Pack Usage Precautions Usage Precautions / About Notations‹When closing the disk cover About NotationsHow to Use the Onscreen Manual How to Use this ManualManual Types and Contents Names and Functions of Parts Names and Functions of Parts Indicators Indicator Name/Status Confirm the Status Using the LEDsFirst-time Operation Turn the computer over and insert the battery packConfirm the inclusion of all parts Read the Limited USE License Agreement ÎOpen the display Connect your computer to a power outletTurn your computer on Handling the AC adaptorFirst-time Operation Setup WindowsCreate User Accounts to recognize this computers user About the Icon Enlarger ‹This concludes the first-time use operation guidelinesScreen Display Password Reset FunctionRoles of Icons on the Notification Area Starting Up Starting Up/Shutting DownLog-on to Windows Select your application‹To shut down using the keyboard Shutting Down power off your computer‹When you leave the computer or interrupt your work Starting Up/Shutting Down‹When the cursor doesn’t move the way you want it to Using the Touch PadUsing the Fn Key Expanding Memory Power off your computer. ÎInserting / Removing the RAM Module ‹Inserting‹Removing Put the cover and battery pack back in placeExpanding Memory Running the Setup Utility Setup UtilityKey Operations Setup UtilityHow to use the screen Main Menu Information MenuSecurity Menu Advanced MenuBoot Menu Exit Menu Boot MenuMaintenance Usage/Handling/MaintenanceUsage Environment HandlingUsage/Handling/Maintenance To enable IEEE802.11a Turning on/off the Wireless LAN PowerEnable/Disable Wireless LAN Standard IEEE802.11a Windows/Antivirus Protection ‹Use Fast User SwitchingWindows Change the Way Users Log on or offIf the message Your computer might be at risk is displayed Security Center/Antivirus ProtectionWindows Security Center Windows/Antivirus Protection Windows UpdatePop-up Blocker Computer Viruses‹Before using the drive Using CD/DVD‹While the DVD-ROM & CD-R/RW drive is being accessed ‹Internal DVD-ROM & CD-R/RW drive connection inter- faceWhen Changing Hard Disk Partitions When Using Peripheral DevicesInternal Hard Disk To Protect DataList of Error Codes Troubleshooting Dealing with Problems SummaryMay not cause the processing speed to increase ‹Problems with Passwords and Messages Dealing with Problems SummaryEnter Space Esc ‹Problems with DisplayShift Esc ‹Problems with Operation during Use‹Problems with Onscreen Reference Manual ‹Problems with Battery‹Reinstalling B’s Recorder/B’s CLiP ‹Problems with Expanding MemoryBefore Reinstallation Reinstalling SoftwareConnect the AC adaptor ReinstallingChange the settings in the Setup Utility Reinstalling Software ‹Changing the drive letter Return the Setup Utility settings to their default valuesIf you can connect to the Internet, perform Windows Update About Intel software products Limited USE License AgreementTermes, clauses et conditions Contrat de licence dusage limitéLicense ‹Precautions Hard Disk Backup FunctionBefore Using a Hard Disk Backup Function Create a Backup Area Backing Up and Restoring Data Hard Disk Backup FunctionTo disable the hard disk backup function Hard Disk Data Erase Utility When Disposing of This ComputerBefore Erasing Data ‹Preparing ‹Confirm the followingsImportant Information Main Specifications SpecificationsPre-installed Software*24 Specifications Index Memo Page SS0905-0