Panasonic CF-71 manual Setting the Supervisor Password, To disable your supervisor password

Security Measures

13

Setting the Supervisor Password

(enabling, changing, disabling)

1 Run the Setup Utility (			page 34)
2 Using	and	, select [Supervisor Setup], then press Enter
3 Using	and	, select [Supervisor Password], then press
Enter

4 To enable or change your supervisor password

Enter your password at the [Enter Supervisor Password], then press .

CAUTION

Your password will not be displayed on the screen.

Please limit your password to seven characters. Note that there is no distinction between upper and lower case letters.

White colored keys can be used. Note that the space bar and function keys cannot be used.

Do not input your password while holding down on Shift or Ctrl .

Use only the upper horizontal row of numeric keys to input your user password.

Do not forget your password. If a password is forgotten you will be unable to use your computer. Please contact Panasonic Technical Sup- port.

To disable your supervisor password

Using	and	, select [Delete Supervisor Password], then press Enter .
Go to step 7.

5 Re-enter your password at the [Enter Supervisor Password Again]

(This is for confirmation purposes.)

NOTE

When you do not want the User Password enabled, changed, or dis- abled without permission,

use and , to select [User Password Protection], then set [Enable]

with .

6 Using and , select [Set Supervisor Password], then press Enter

7 At the confirmation screen, press Enter

8 Press Esc to end the password setting procedure

9 Close the Setup Utility ( page 34)