Panasonic CF-71 manual LED Indicators

Page 3

LED Indicators

3

Caps Lock

This indicator lights green when Caps Lock is pressed. Subsequent non-

shifted input is capitalized.

NumLk (Numeric key)

These indicators light green when NumLk is pressed and then Key Pad is

pressed while holding down the Fn key. This causes a portion of the key-

board to function as a numeric keypad. The [Enter] key functions differ-

ently depending on the application.

ScrLk (Scroll lock)

This indicator lights green when ScrLk is pressed. Scroll lock functions

differently depending on the application.

KeyPad (Arrow key)

This indicator lights green when Key Pad is pressed while holding down

the Fn key. When the indicator is not lit, a portion of the keyboard func-

tions as arrow keys. The [Enter] key functions differently depending on the

application.

Multimedia pocket

This indicator lights when the multimedia pocket device (floppy disk drive,

device status

CD-ROM drive or SuperdiskTM drive) is accessed.

(When using the floppy disk drive as an external floppy disk drive, only the

access lamp on the side of the floppy disk drive is lit.)

Hard disk status

This indicator lights when the hard disk drive is accessed.

Battery pack sta-

Not lit :

AC adapter not connected or charging not being per-

tus

Orange

formed.

:

Charging in progress.

Green

:

Charging finished.

Red

:

Battery is low

(remaining battery capacity is approx. 9% or less).

Flashing red

:

Battery pack or charging malfunction.

Flashing orange five times after the AC adapter is connected

:

Charging on standby. (The ambient temperature is

outside the allowable range. Once the allowable range

requirement is satisfied, charging begins automatically.)

Power status

Not lit :

Power off

Green

:

Power on

Flashing

green

: Suspend mode

Image 3

Contents Reference Manual CF-71 Series ContentsKey Functions Popup Window Key CombinationsLED Indicators To next Panasonic Hand Writing Touch PadDrawing Characters or Figures Determine the position to begin drawingClose the Hand Writing mode Panasonic Hand Writing Touch PadSelect Save As or Save from File Starting Up Your Computer Quickly Setting the Suspend or Hibernation FunctionShutting Down Using the Suspend or Hibernation Function Suspend/Hibernation FunctionsPush the sleep switch or Slide the power switch Suspend/Hibernation FunctionsResuming Operation Precautions for Using the Suspend or Hibernation Function Situation Function to use Reference When the User Password is setSetting the user password enabling, changing, disabling Security MeasuresSecurity Measures To disable your passwordRe-enter your password at the Enter User Password Again When the coffee break password is setTo disable the Coffee break Password Setting the Coffee break Password enabling or disablingWhen the supervisor password is set Preventing theft of damage to data using a floppy diskProcedure Run the Setup Utility UsingSetting the Supervisor Password To disable your supervisor passwordEnabling, changing, disabling Conserving Power Computing On the RoadThings to Remember Computing On the Road Setting Power ManagementHibernation with Using How to set Advanced and the suspend/hibernation timeoutPower Management settings Fn + F9 Battery PowerBattery Status Use the Battery Indicator to Check on the Battery StatusIf the suspend or hibernation function is set Battery PowerWhen the Remaining Battery Charge Becomes Low Save your data and power off your computerOpen the cover Replacing the Battery PackRemove the battery pack Open the displayClose the cover Connect the battery packConnector Tab Label-side up Flat Cable When closing the coverInstalling/Removing a Multimedia Pocket Device Using a Multimedia Pocket DeviceFDD Cable Using a Multimedia Pocket DeviceUsing the Floppy Disk Drive as an External Drive Parallel PortPC Card Using PC CardsInstalling/Removing the PC Card Installing a PC CardPC Card Utility Program Using PC CardUninstalling Installing only if the ZV card does not operate properlyInstalling/Removing the RAM Module Adding MemoryRAM Module Port Replicator Using a Printer + F3 Using an External DisplayConnect the external display to your computer External Display PortRun the Setup Utility Using Enter Using USB DevicesUSB Port Using USB DevicesData Communications Setting for Infrared Data CommunicationsInfrared Data Communications Preparations for Infrared Data CommunicationsInstalling/Removing the hard disk Removing/Installing the hard diskHard Disk Drive Connector Hard disk DriveRibs Main Screen Setup UtilityRunning the Setup Utility Closing the ProgramSetup Utility System SetupParameters Power Management Settings Power ManagementWSS Codec I/O Supervisor SetupIRQ Network Technical InformationNon-recognition from other operating systems Technical InformationHard Disk Some software will not run normallySystem module error occurs ReinstallationPower Saving Function in the Sound Chip It takes a long time to reboot or the computer locks upCode Description List of Error CodesDMI Viewer Running DMI ViewerSaving information to a file Dealing With Problems Battery IndicatorStarting Up Dealing With Problems DisplayDisk Operations Character Input Application SoftwareNetwork Connecting Peripherals Disclaimer Trademarks Copyright