Connecting Peripherals

Dealing With Problems (Advanced)

5 5

Your peripheral does not				You need to use drivers conforming to Windows 95 Version 4.00.950B (OSR-2.1).
work (An error occurs while				Some earlier drivers will no longer work.
installing the	driver)			For more information, please ask the manufacturer of the driver in question.

Unable to print				Check the computer-printer connection.
				Make sure the printer is on.
				Make sure the printer is in the online state.
				Make sure paper is in the printer tray and there is no paper jam.
				Confirm that [Parallel Port] has not been set to [Disable].

T h e c u r s o r		d o e s	n o t	Check your mouse connection, then reboot the computer from the keyboard.
move from mouse opera-				From the keyboard, you may choose to press down on	, then select [Shut
tions				Down].
The device connected to				Check the connection.
the serial port does not				Confirm that the device driver for the serial port works.	Please refer to the refer-
w o r k				ence manual of the device.
				Confirm that two mouse devices are not connected, one through the external
				keyboard/mouse port and the other through the serial port.
				Try setting [Touch Pad] to disable in the Setup Utility.
				Confirm that [Serial Port A] has not been set to [Disable].

E x t e r n a l	m o u s e		o r	Try setting [Touch Pad] to disable in the Setup Utility.
t r a c k b a l l c o n n e c t e d t o				In some circumstances, if a PS/2 external mouse with a serial interface conver-
t h e e x t e r n a l		k e y b o a r d /		sion function is connected to the port, it may not operate normally. Try connecting
m o u s e p o r t		d o e s	n o t	it to the serial port.
w o r k

A PC Card does not work				Make sure the card is properly inserted.
				Confirm that the card conforms to the PC Card Standard.
				Note that after a driver is installed, the computer must be rebooted.
				Check that the proper port settings have been made.
				Read the PC Card’s manual. Or, you may need to call the manufacturer of the PC
				Card.

You do not know the				page 28
available RAM module

The RAM module has not				Make sure the RAM module has been properly inserted.
been recognized				Use the RAM module that support the recommended specifications.

The address map for				Check the address map by going to [View Resources] in [Start] - [Settings] - [Control
IRQ, I/O port address,				Panel] - [System] - [Device Manager] - [Computer] - [Properties].
etc. is unclear

A USB device does not				Make sure a driver is installed.
w o r k				Contact the manufacturer of the product.