Panasonic LC2H How to set, Preset value setting mode, Lock mode, Backlight setting mode

Page 13

LC2H

How to set

1. Preset value setting mode

This is the mode for setting preset values.

Press the MODE key. Set the digit.

Set the value.

1)Pressing the MODE key takes you to the preset value setting mode.

Sample display in preset value setting mode

(when preset value is 1000)

2)Pressing the setting key moves the flashing digit left by one. Following the highest digit it returns to the lowest digit and each time the digit setting key is pressed it moves one to the left.

3)Pressing the set key increases the

value by one. (After 9 it returns to 0 and then changes to 1, 2, 3, etc.)

4)Pressing the front panel reset key sets the displayed preset value and returns you to the regular operation mode.

5)In the preset value setting mode if you do not operate the digit setting key or the set key for ten seconds or more you will be returned to regular operation. In this case the preset value will not change.

2. Lock mode

This mode prohibits everything except the preset value setting mode.

+

Press the SET key while pressing

Un-Lock

 

Lock

 

the MODE key.

 

 

 

1)Pressing the set key while holding down the mode key takes you to the lock mode.

2)The display reads “Un-Lock” after entering the lock mode (initial setting).

Display after entering lock mode (Example showing “Un-Lock”.)

3) Pressing the setting key changes the

display between “ Lock” and “Un- lock”.

(Example showing “

Lock”.)

4)Pressing the front panel reset key sets the content displayed and returns you to regular operation mode.

Note: You will not be returned to regular operation mode if you do not press the front panel reset key.

5) When the lock mode display reads

“Lock”, you will not be able to move to the backlight setting mode, the input setting mode, or the output setting mode.

3. Backlight setting mode

This is the mode for setting the backlight during count up.

+

Press the SET key while pressing

 

 

 

Lit red

 

 

 

Flashes green

the MODE key.

 

 

 

Lit green

 

 

 

Flashes red

1)Pressing the SET key two times while holding down the MODE key takes you to the backlight setting mode.

2)The display in the backlight setting

mode reads “

LEd”

Display after entering

the backlight setting mode.

3)The LED backlight will be red (initial setting).

4)The backlight changes from flashing green to flashing red to lit green and to lit red with each press of the setting key.

5)Pressing the front panel reset key sets the current backlight color and returns you to regular operation mode.

Note: You will not be returned to regular operation mode if you do not press the front panel reset key.

4. Input setting mode

This is the mode for setting addition or subtraction.

+

Press the SET key while pressing

Addition

 

Subtraction

 

the MODE key.

 

 

 

1)Pressing the SET key three times while holding down the MODE key takes you to the input setting mode.

2)The display after entering the input

setting mode reads “

UP” (initial

setting).

 

Display after entering input setting mode

(Example showing “UP”)

3)Pressing the setting key changes the display to “dn” (subtraction) and pressing it again changes it to “UP” (addition). The display alternates between “dn” and “UP”.

(Example showing “dn”)

4)Pressing the front panel reset key sets the content displayed and returns you to regular operation mode.

Note: You will not be returned to regular operation mode if you do not press the front panel reset key.

109

CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Timers/Time Switches/Counters/Hour Meters Product chart FeaturesProduct types Specifications Installation frame type Standard typePC board mounting type Common Applicable standard100 Part names DimensionsPanel mounting diagram Installation frame typePanel cut-out dimensions Terminal layout and wiring diagrams 1 Standard typeTerminal layout and wiring diagrams PC board mounting type External dimensionsInput method Standard typeBacklight type Explanation of operation104 Free voltage input type Voltage input typeVoltage input type Backlight luminance Environment for use106 RoHS Directive compatibility informationOne shot/over count One shot/recount Options Mounting frame ATH3803107 Mode key Front reset keySetting key Lock switchPreset value setting mode How to setLock mode Backlight setting modeCompliance with the CE marking Output setting mode This sets the operation mode111 Operation modeInput connection Contact input Input and output connectionAs PNP output Self-diagnosis functionLC2H total counter installation frame type LC2H total counter one-touch installation typeLC2H preset counter Insulation sheetLithium battery 3 Accessories for LC2H total counterInstallation parts Mounting frame OptionsLCD AEL3Typical Counter Applications COUNTER-RELATED Terminology Connection of input Except for LC4H-S/AC type Protective circuit for counter contactSuperimposed surge of power supply Installing the counterSignal input Leakage current143 Sockets Unit mm inch, Tolerance ±1 ±.039Mounting parts AccessoriesPanel cover Black Installation methods Installing DIN Size CounterSurface mount 180 AttachmentPM48W PM4HW PMH-M PM4H-M/PM4S PM48W PM4H-WPMH-M PM4HM-/PM4S CDX S1DXM-/S1DXLC4H MC6 LC4H-L LC4HLC48W LC4H-W LC4H EM48S LC4H-LForeign Specifications Overview 120 200 720 240 Pilot Duty B300 AC applied Voltage Current Power During Input120 600 360 240 Pilot Duty C300 AC applied 120 800 180 240Foreign Specifications Hour Meters CountersLC4H-L Pilot Duty C300 LC4H-S LC4H-W Pilot Duty C300Counter, Hour Meter conforming to EN/IEC standards CE Markings OverviewCE markings and EC directives Appropriate
Top Page Image Contents