Sennheiser EM 3532-U manual

12Setting a receiving frequency, allocating a frequency memory and assigning a channel number

The EM 3532 receiver has a switchable frequency memory to store a maximum of 32 receiving frequencies with their respective channel numbers. The storing procedure is similar for each entry or modification:

￿	Press the / buttons to select the “FREQUENCY” menu. Then press the SET button. The
	“FREQUENCY MHZ” display on the display panel begins to flash:

￿	With the / buttons you can now select a different frequency.
	The display jumps to the next frequency in 5-kHz steps:

￿When you get to the desired frequency, press the SET button until “Sto” briefly appears on the display.

￿You now have to check whether the frequency memory (nos. 1 to 32) is allocated correctly. The display indicates the receiving channel with the allocated frequency memory, and the “CHANNEL” display lights up. The display for the frequency memory begins to flash.

52