5 Assembly and mounting
Use as a stand-alone receiver
When using the EM 3532 as a stand-alone receiver, it is easiest to use the supplied telescopic antennæ. They can be mounted quickly and easily to the rear of the receiver and are suitable for all applications where – good reception conditions provided – a wireless transmission system is to be used without a large amount of installation work. The best reception quality, however, is obtained by using remote antennæ (see chapter 6).
To ensure that the receiver is securely mounted on a surface on which it cannot slip, four self- adhesive soft rubber feet are supplied. These feet are stuck into the recesses on the lower side of the receiver.
Ensure that the recesses are clean and free from grease before mounting the feet.
Note
Do not use these feet if rack-mounting the receiver.
