13 Deleting a receiving frequency, emptying a frequency memory
You can empty a frequency memory if you enter three “hyphens” when assigning a channel number.
The last frequency stored cannot be deleted. If you try to delete the last frequency stored, the display briefly indicates “LASt” and then switches back to the standard display.
You can discontinue the programming of this menu by briefly (!) pressing the SET button. The display briefly indicates “ESC” and then switches back to the standard display. The previous settings are kept.
If you do not press any of the three programming buttons for more than 30 seconds, the setting mode is automatically left. The display briefly indicates “ESC” and then switches back to the standard display. The previous settings are kept.
For some countries, this menu is locked via a special configuration program, since not all tunable receiving frequencies are approved in these countries. If the “FREQUENCY” menu is selected, “Loc” appears on the display.
54