How to adjust the lens
How to adjust the lens focus, lens zoom and lens up/down position movement (optical shift)
The focus, zoom and up/down position of the images projected on the screen can be adjusted while the projector is positioned appropriately in relation to the screen.
Press the LENS button on the remote control or on the control panel of the main unit.
Pressing the button changes the setup screen in the order of “Lens focus”, “Lens zoom” and “Lens shift”.
Caution
Be careful not to catch your fingers between the lens and shroud when shifting the lens.
Choose an item and adjust it using buttons.
Note
•When a lens without zoom functions is used, the lens zoom adjustment menu will still displayed, but no operations can be performed using the items on this menu.
•By shifting the lens up/down position, it is possible to make adjustments upward or downward from the standard position in the direction of the upper 50% of the projected screen height.
•Operations can be performed faster by holding down the 
buttons for about 3 or more seconds.
How to adjust the lens position to the left or right
When the lens left/right adjustment dial is turned clockwise, the screen moves toward the left; conversely, when it is turned counterclockwise, it moves toward the right. The maximum travel distance toward the left or right is 10% of the projection screen width.
Lens left/right adjustment dial
1 LAMP2 | POWER |
The screen moves toward the right
The screen moves toward the left
D LP
Maximum adjustment position
Attention • Move the lens left/right adjustment dial to any position up to the maximum adjustment position to make the adjustment. Turning the dial with undue force may cause malfunctioning.
24