Panasonic PT-D5500EL manual Option 1 settings

OPTION 1 settings

	OPTION1
COLOR CORRECTION
CONTRAST MODE
AUTO SIGNAL		OFF
MEMORY LOAD		DEFAULT
MEMORY SAVE		MEMORY1
SELECT	ENTER		RETRN

COLOR CORRECTION

OFF : Standard setting

USER : The six colours of red, green, blue, cyan, magenta and yellow can be adjusted and registered for each of four signal systems: Video, S-Video, RGB and

YPBPR.

Press the “ENTER” button to make the detailed settings.

	COLOR CORRECTION		The current signal
R		RGB
	0		system is displayed.
G	0
B	0
Cy	0
Mg	0
Ye	0
SELECT	ADJ	RETRN

MEMORY SAVE

Once adjustment settings are registered with MEMORY, they are automatically loaded each time the projector is powered up. It is not necessary to readjust settings at every power on.

(e.g. Registering positioning data with “MEMORY1”)

Apply an input signal you want to register, and then adjust the picture position, size, and others.

Choose “MEMORY SAVE” on “OPTION1”.

Choose “MEMORY1” using the or buttons and press the “ENTER” button.

Note • The memory has “MEMORY1” to “MEMORY3”.

After recognizing the flashing of the “MEMORY1” display, press the “ENTER” button again.

The above adjusted settings has been registered with “MEMORY1”. Similarly you can also register settings with “MEMORY2” or “MEMORY3”.

ENGLISH

CONTRAST MODE

There are two modes for adjusting to the operating environment.

NORMAL : The contrast is set to normal and the brightness to maximum.

HIGH : The contrast is set to maximum and the brightness to normal.

AUTO SIGNAL

The position where the screen is displayed can be adjusted automatically without pressing the AUTO SETUP button on the remote control each time signals are input when signals are input frequently such as when the projector is used at a conference.

ON : Auto setup is performed automatically when the video signals of the images being projected have changed.

OFF : The input auto setup function is set to OFF.

MEMORY LOAD

The adjustment data stored in the memory can be loaded.

DEFAULT : The standard settings are

loaded.

MEMORY1, 2, 3: The pre-registered adjustment data (MEMORY1, 2, 3) is loaded.

33