Using Web Browser Control
Error information page
When 
is displayed on the status information screen, click it to display the error details.
OK: Normal operation
FAILED: Occurrence of trouble
Note • Depending on the nature of the error, the projector may be placed in the standby mode for its own protection.
When [FAILED] has appeared for an item
Parameter | Description | |
|
| |
MAIN CPU BUS | Trouble has occurred in the microcomputer circuitry. Consult your dealer. | |
|
| |
FAN | Trouble has occurred in the fan or its drive circuit. | |
Consult your dealer. | ||
| ||
|
| |
OPTICS MODULE | The temperature inside the projector is high. | |
TEMPERATURE | ||
| ||
|
| |
INPUT AIR | The input air temperature is too high. It may be that the projector is being used | |
TEMPERATURE | where the ambient temperature is high such as near a heating appliance. | |
|
| |
LAMP REMAIN TIME | The lamp runtime has exceeded the prescribed cumulative time, and it is now time | |
to replace the lamp. | ||
| ||
|
| |
LAMP STATUS | The lamp has failed to light. | |
|
| |
OPTICS MODULE | Trouble has occurred in the temperature detection sensor inside the projector. | |
TEMP. SENSOR | Consult your dealer. | |
|
| |
INPUT AIR TEMP. | Trouble has occurred in the sensor used to detect the input air temperature. | |
SENSOR | Consult your dealer. | |
|
| |
BATTERY | The backup battery has been run out. | |
Consult your dealer. | ||
| ||
|
| |
COLOR WHEEL | Trouble has occurred in the colour wheel or the colour wheel drive circuit. | |
Consult your dealer. | ||
| ||
|
|
If requesting service, ask your nearest Authorized Service Centre.
48