Setting up range using the lens shift function
This projector can be placed in various places by controlling the shift lever at the front side of the projector to move the lens in order to adjust the position of the projected image.
BHorizontal lens shift
About 25% of the | About 25% of the | |||||||||
screen (maximum) | screen (maximum) | |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Screen
When shift lever is moved | When shift lever is moved |
to the left (full) | to the right (full) |
BSetting up range
H
Projector
V 
started
Getting
Projector set up range (centre of the lens)
Screen
BVertical lens shift
When shift lever is moved down (full)
About 63% of |
|
| Screen |
| |||
the screen |
|
| |
|
|
| |
(maximum) |
|
|
|
|
|
|
|
About 63% of
Vertical (V) | Horizontal (H) |
About 63% | About 0% |
|
|
About 50% | About 8% |
|
|
About 30% | About 17% |
|
|
About 10% | About 23% |
|
|
About 0% | About 25% |
|
|
*The values in the table are for the width and the height of the screen.
the screen (maximum)
When shift lever is moved up (full)
NOTE:
BTurn the shift lever right to secure the shift lever.
BWhen the lens has been shifted fully to the right or left, you will not be able to shift the lens up or down.
When the lens has been shifted fully up or down, you will not be able to shift the lens to the right or left.
BGenerally, the maximum picture quality is obtained when the lens is moved to the centre (horizontally and vertically).