Contents, Precautions with regard to safety

Contents
Preparation
IMPORTANT SAFETY NOTICE ...	2
Precautions with regard to
safety	5
Accessories	9
Before use	9
Location and function of each
part	11
Getting started
Setting-up	16
Projection methods, Projector
position, Projection distances,
Setting up range using the lens shift
function
Connections	20
Connecting to video equipment,
Connecting to equipment
compatible with HDMI,
Connecting to computer
Preparation for the remote
control unit	23
Basic operation
Turning on the power	24
Turning off the power	26
Useful functions
Correcting keystone distortion ...	28
Pausing a picture	28
Selecting the picture mode	29
Turning on the button lights	29
Setting the aspect ratio	30
Using the COLOR MANAGEMENT...	32
Retrieving the saved picture
settings	35
Adjustments and settings
On-screen menus	36
Menu screens, Menu operation
guide, Returning a setting to the
factory default
Adjusting the picture	40
PICTURE MODE, CONTRAST,
BRIGHT, COLOUR, TINT,
SHARPNESS, COLOUR TEMP.,

DYNAMIC IRIS, ADVANCE MENU, MEMORY SAVE, MEMORY LOAD, TV-SYSTEM, SIGNAL MODE, Projecting sRGB-compatible pictures

Adjusting the position	44
Horizontal position, Vertical position,
DOT CLOCK, CLOCK PHASE,
ASPECT,AUTO SETUP
Turning off the picture
momentarily (SHUTTER)	45
Changing the display language...	45
Option settings	46

OSD, Noise Reduction (NR),

CINEMA REALITY, BACK COLOUR, WSS, FRONT/REAR, DESK/CEILING, FAN CONTROL, LAMP POWER, LAMP RUNTIME

Care and maintenance
When the TEMP indicator and the
LAMP indicator are illuminated...	48
Cleaning and replacing
the air filter	50
Replacing the lamp unit	51
Before calling for service	54
Cleaning and maintenance	55
Others
Specifications	56
Appendix	58
List of compatible signals, General
arrangement of the COLOR
MANAGEMENT menu, Projection
dimensions calculation methods
Dimensions	61
Trademark acknowledgements...	62

Precautions with regard to safety

WARNING

If you notice smoke, strange smells or noise coming from the projector, disconnect the mains plug from the mains socket.

BDo not continue to use the projector in such cases, otherwise fire or electric shocks could result.

BCheck that no more smoke is coming out, and then contact an Authorised Service Centre for repairs.

BDo not attempt to repair the projector yourself, as this can be dangerous.

Do not install this projector in a place which is not strong enough to take the full weight of the projector.

BIf the installation location is not strong enough, it may fall down or tip over, and severe injury or damage could result.

Installation work (such as ceiling suspension) should only be carried out by a qualified technician.

BIf installation is not carried out correctly, there is the danger that injury or electric shocks may occur.

If foreign objects or water get inside the projector, or if the projector is dropped or the cabinet is broken, disconnect the mains plug from the mains socket.

BContinued use of the projector in this condition may result in fire or electric shocks.

BContact an Authorised Service Centre for repairs.

Do not overload the mains socket.

BIf the power supply is overloaded (for example, by using too many adapters), overheating may occur and fire may result.

Do not remove the cover or modify it in any way.

BHigh voltages can cause fire or electric shocks.

BFor any inspection, adjustment and repair work, please contact an Authorised Service Centre.

Clean the mains plug regularly to prevent it from becoming covered in dust.

BIf dust builds up on the mains plug, the resulting humidity can damage the insulation, which could result in fire. Pull the mains plug out from the mains socket and wipe it with a dry cloth.

BIf not using the projector for an extended period of time, pull the mains plug out from the mains socket.

Preparation

4-ENGLISH

ENGLISH-5