Panasonic PT-D3500E manual Powering up the projector, Making adjustment and selection

Page 22

Projection

Powering up the projector

Remove the lens cover.

Connect the supplied power cable. (220 - 240 V AC, 50 Hz/60 Hz)

Press the “I” marked side of the MAIN POWER switch to turn on the power.

The power indicator lights up red, and the projector is placed in the standby mode.

Press the LENS button three times to adjust the lens shift. (Refer to page 24.)

Press the AUTO SETUP button if the input signal is RGB/DVI signal. [on the main unit or the remote control]

Fit the image size to the screen size.

Press the LENS button twice and adjust the zoom of the lens on the lens zoom adjustment menu.

Press the POWER button on the main unit, or the POWER ON () button on the remote control.

The power indicator illuminates in green and soon the image is projected on the screen.

Making adjustment and selection

Roughly adjust the focus of the lens. (Refer to page 24.)

Press the LENS button on the main unit or the remote control unit to display a focus adjustment

screen. Pressing buttons to adjust the image into focus.

Select and set the projection scheme. (Refer to page 35.)

Select the input signal by pressing the input selector button (the RGB/VIDEO button on the main unit, or the RGB1/RGB2/VIDEO/S-VIDEO/DVI button on the remote control).

Turn the feet, and adjust the tilt of the main unit in the front and rear or left and right.

Use the lens left/right adjustment dial to adjust the direction of the lens. (page 24)

Press the LENS button and adjust the focus of the lens on the lens focus adjustment menu.

Display the zoom adjustment menu again and adjust the zoom of the lens to fit the image size to the screen size. (Refer to page 24.)

Note • If the projector is powered up at about 0˚C, a warm-up period of approximately five minutes may be necessary to start projection.

The temperature monitor (TEMP) lights during the warm-up period.

When the warm-up is completed, the temperature monitor (TEMP) turns off and the image is projected on the screen.

•If the surrounding temperature is very low and the warm-up period exceeds five minutes, the control determines it as an abnormal condition and turns off the power automatically. If this happens, raise the surrounding temperature to 0°C or higher and then turn the main power “on” and turn the power “on” ().

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Operating Instructions Commercial UseImportant Safety Notice Dear Panasonic CustomerFor Your SAFETY, Please Read the Following Text Carefully Important the Moulded Plug U.K. onlyContents Precautions with regard to safety Do not insert any foreign objects into the projector Do not disassemble the lamp unitDo not place liquid containers on top of the projector Always disconnect all cables before moving the projectorDo not look into the lens while the projector is being used AccessoriesUse only the specified battery Do not use the old lamp unitPrecautions on handling Name and function of parts When the operation mode selector Set to ComputerFront and side of the projector Rear and side view of the main unit Controls on upper panel Side-mounted connection terminals Effective range of remote control operation Using the remote control unitLoading dry cells Using the remote control as a PC mouse Setting projector ID number to remote controlOperation mode selector switch Using a wired remote control Projection schemes InstallationInstallation geometry Projection distancesSetup precautions ConnectionControl PC DVD player Video deck Example of connecting with AV productsAudio Amplifier Digital Hi-vision video deck Speakers Example of connecting with PCs How to install the projection lens How to remove the projection lensMaking adjustment and selection Powering up the projectorRoughly adjust the focus of the lens. Refer to Powering off the projector Direct power off functionHow to adjust the lens position to the left or right How to adjust the lensChoose an item and adjust it using buttons Using the Shutter function Automatic adjustment Auto SetupUsing the Freeze function Press the Shutter button againPress the D.ZOOM + button of the remote control Using the digital zoom D.ZOOM + functionChange the magnification with the D.ZOOM + button On-screen menus Structure of menu screensBasic menu operations Menu items settingResetting to the factory default Returning to the previousAdjusting the picture Sharpness TV-SYSTEMAdjusting the position How to use Advanced Menu Volume Adjusting the audioAudio Mute OPTION1 settings OPTION2 settings FUNC1 PasswordFAN CONTROL2 KEY AssignAmend Password Setting the securityInput Password Text DisplaySystem requirements Setting the networkConnecting the PC Connection exampleCommunication conditions Factory setting Using the serial terminalsPin assignments and signal names Examples of connectionConnecting to a PC Computer Projector DTE specifications Control commandsCable specifications RemarksPin assignments and control Using the Remote 2 terminalSub 9-pin female external appearance Lamp Information Checkpoint Remedial measure TemperatureIndication of lamp monitor IndicationClean the air filter Cleaning and replacement of air filterProcedure of cleaning Dismantle the air filterTiming of lamp unit replacement Replacing the lamp unitLamp unit will be hot after it has been used Lamp unit replacement stepsHave a Phillips screwdriver ready ahead of time Replacing the lamp unit Password change Using Web Browser ControlAccessing from the Web browser Click OKChange password button Power On/Off control Shutter control Basic controlDetail control Monitor informationOK Normal operation Error informationWhen Failed has appeared for an item Failed Occurrence of troubleMail setup Lamp Runtime remainingMail setup page continuing DNS server set upPOP server setup Ping testContents of mail sent Adjust clockNetwork config Network statusPJLink security authentication Using the PJLink protocolSupported commands Command Control Description RemarksRemote control Symptoms ChecksPower does Not turn onSpecifications Remote control Power source Length of power supply cord CabinetOutside dimensions Wireless mouse receiverCompatible Signal List Projection distances by projection lens Calculation formulas for projection distance by lens typesDimensions For business users in the European Union Trademark AcknowledgementM0605-0
Related manuals
Manual 64 pages 34.42 Kb

PT-D3500E specifications

The Panasonic PT-D3500E is a high-performance portable projector designed primarily for professional and business environments. Offering outstanding image quality, versatility, and usability, it is well-suited for a variety of applications, including conferences, classrooms, and large-scale events.

One of the standout features of the PT-D3500E is its impressive brightness, delivering up to 3,500 lumens. This ensures vibrant and vivid image reproduction, even in well-lit environments. Featuring a compact and lightweight design, the projector is easy to transport, making it a convenient choice for on-the-go presentations.

The PT-D3500E utilizes a 3LCD optical system, which guarantees excellent color accuracy and uniform brightness across the projected image. This technology works by projecting red, green, and blue light simultaneously, resulting in stunningly realistic images that capture audience attention.

Additionally, the PT-D3500E incorporates a high-resolution WUXGA (1920 x 1200) resolution, providing sharp details and clarity for both text and visuals. This level of detail is crucial for presentations where fine details can make a significant impact, ensuring that every slide is eye-catching and professional.

The projector is designed with advanced connectivity options, including HDMI, VGA, and component inputs, which allow for seamless integration with various devices. This versatility ensures compatibility with laptops, tablets, and other multimedia sources, enabling users to showcase content effortlessly.

In terms of operation, the PT-D3500E features a user-friendly interface and remote control for easy navigation and settings adjustment. The model includes a range of flexible lens options, allowing users to adapt the projector to different room sizes and layouts effectively. With a long lamp life of up to 4,000 hours in eco mode, users can rely on this projector for extended use without frequent maintenance.

The PT-D3500E also emphasizes environmental sustainability, incorporating features that reduce energy consumption and comply with international eco-friendly standards. Its robust construction ensures durability, making it a reliable choice for demanding professional use.

In conclusion, the Panasonic PT-D3500E represents a versatile, high-quality projection solution ideal for professionals seeking bright, detailed images and ease of use. With its advanced features, connectivity options, and robust design, it stands out as a top choice for various presentation needs.
Top Page Image Contents