Panasonic PT-D3500E manual Important the Moulded Plug U.K. only

Page 3

IMPORTANT: THE MOULDED PLUG (U.K. only)

FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.

This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 13 amp fuse is fitted in this plug. Should the fuse need to be replaced, please ensure that the replacement fuse has a rating of 13 amps and that it is approved by ASTA or BSl to BS1362.

Check for the ASTA mark or the BSl mark on the body of the fuse.

If the plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover, the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from an Authorized Service Centre.

If the fitted moulded plug is unsuitable for the socket outlet in your home, then the fuse should be removed and the plug cut off and disposed of safely. There is a danger of severe electrical shock if the cut off plug is inserted into any 13 amp socket.

If a new plug is to be fitted, please observe the wiring code as shown below. If in any doubt, please consult a qualified electrician.

WARNING: –THIS APPLIANCE MUST BE EARTHED.

IMPORTANT: –The wires in this mains lead are coloured in accordance with the following code: – Green-and-Yellow: Earth

Blue:Neutral

Brown:Live

As the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows.

The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked with the letter E or by the Earth symbol or coloured GREEN or

GREEN-AND-YELLOW.

The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the letter N or coloured BLACK.

The wire which is coloured BROWN must be connected to the terminal in the plug which is marked with the letter L or coloured RED.

FUSE

How to replace the fuse. Open the fuse compartment with a screwdriver and replace the fuse.

ENGLISH

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Commercial Use Operating InstructionsDear Panasonic Customer Important Safety NoticeImportant the Moulded Plug U.K. only For Your SAFETY, Please Read the Following Text CarefullyContents Precautions with regard to safety Always disconnect all cables before moving the projector Do not disassemble the lamp unitDo not place liquid containers on top of the projector Do not insert any foreign objects into the projectorDo not use the old lamp unit AccessoriesUse only the specified battery Do not look into the lens while the projector is being usedPrecautions on handling Name and function of parts Set to Computer When the operation mode selectorFront and side of the projector Rear and side view of the main unit Controls on upper panel Side-mounted connection terminals Using the remote control unit Effective range of remote control operationLoading dry cells Setting projector ID number to remote control Using the remote control as a PC mouseOperation mode selector switch Using a wired remote control Projection distances InstallationInstallation geometry Projection schemesConnection Setup precautionsExample of connecting with AV products Control PC DVD player Video deckAudio Amplifier Digital Hi-vision video deck Speakers Example of connecting with PCs How to remove the projection lens How to install the projection lensPowering up the projector Making adjustment and selectionRoughly adjust the focus of the lens. Refer to Direct power off function Powering off the projectorHow to adjust the lens How to adjust the lens position to the left or rightChoose an item and adjust it using buttons Press the Shutter button again Automatic adjustment Auto SetupUsing the Freeze function Using the Shutter functionUsing the digital zoom D.ZOOM + function Press the D.ZOOM + button of the remote controlChange the magnification with the D.ZOOM + button Structure of menu screens On-screen menusReturning to the previous Menu items settingResetting to the factory default Basic menu operationsAdjusting the picture TV-SYSTEM SharpnessAdjusting the position How to use Advanced Menu Adjusting the audio VolumeAudio Mute OPTION1 settings OPTION2 settings KEY Assign PasswordFAN CONTROL2 FUNC1Text Display Setting the securityInput Password Amend PasswordConnection example Setting the networkConnecting the PC System requirementsExamples of connection Using the serial terminalsPin assignments and signal names Communication conditions Factory settingRemarks Control commandsCable specifications Connecting to a PC Computer Projector DTE specificationsUsing the Remote 2 terminal Pin assignments and controlSub 9-pin female external appearance Indication TemperatureIndication of lamp monitor Lamp Information Checkpoint Remedial measureDismantle the air filter Cleaning and replacement of air filterProcedure of cleaning Clean the air filterReplacing the lamp unit Timing of lamp unit replacementLamp unit replacement steps Lamp unit will be hot after it has been usedHave a Phillips screwdriver ready ahead of time Replacing the lamp unit Click OK Using Web Browser ControlAccessing from the Web browser Password changeBasic control Change password button Power On/Off control Shutter controlMonitor information Detail controlFailed Occurrence of trouble Error informationWhen Failed has appeared for an item OK Normal operationLamp Runtime remaining Mail setupDNS server set up Mail setup page continuingPing test POP server setupAdjust clock Contents of mail sentNetwork status Network configCommand Control Description Remarks Using the PJLink protocolSupported commands PJLink security authenticationNot turn on Symptoms ChecksPower does Remote controlSpecifications Wireless mouse receiver Length of power supply cord CabinetOutside dimensions Remote control Power sourceCompatible Signal List Calculation formulas for projection distance by lens types Projection distances by projection lensDimensions Trademark Acknowledgement For business users in the European UnionM0605-0
Related manuals
Manual 64 pages 34.42 Kb

PT-D3500E specifications

The Panasonic PT-D3500E is a high-performance portable projector designed primarily for professional and business environments. Offering outstanding image quality, versatility, and usability, it is well-suited for a variety of applications, including conferences, classrooms, and large-scale events.

One of the standout features of the PT-D3500E is its impressive brightness, delivering up to 3,500 lumens. This ensures vibrant and vivid image reproduction, even in well-lit environments. Featuring a compact and lightweight design, the projector is easy to transport, making it a convenient choice for on-the-go presentations.

The PT-D3500E utilizes a 3LCD optical system, which guarantees excellent color accuracy and uniform brightness across the projected image. This technology works by projecting red, green, and blue light simultaneously, resulting in stunningly realistic images that capture audience attention.

Additionally, the PT-D3500E incorporates a high-resolution WUXGA (1920 x 1200) resolution, providing sharp details and clarity for both text and visuals. This level of detail is crucial for presentations where fine details can make a significant impact, ensuring that every slide is eye-catching and professional.

The projector is designed with advanced connectivity options, including HDMI, VGA, and component inputs, which allow for seamless integration with various devices. This versatility ensures compatibility with laptops, tablets, and other multimedia sources, enabling users to showcase content effortlessly.

In terms of operation, the PT-D3500E features a user-friendly interface and remote control for easy navigation and settings adjustment. The model includes a range of flexible lens options, allowing users to adapt the projector to different room sizes and layouts effectively. With a long lamp life of up to 4,000 hours in eco mode, users can rely on this projector for extended use without frequent maintenance.

The PT-D3500E also emphasizes environmental sustainability, incorporating features that reduce energy consumption and comply with international eco-friendly standards. Its robust construction ensures durability, making it a reliable choice for demanding professional use.

In conclusion, the Panasonic PT-D3500E represents a versatile, high-quality projection solution ideal for professionals seeking bright, detailed images and ease of use. With its advanced features, connectivity options, and robust design, it stands out as a top choice for various presentation needs.
Top Page Image Contents