Panasonic PT-D3500E manual Specifications

Power supply

AC 220 - 240 V, 50 Hz/60 Hz

Power consumption

400 W (about 15 W in standby without fan running)

DLPTM panel

Panel size

0.7 inch (aspect ratio 4:3)

Display system

DMDTM element, DLP type

Number of pixels

786 432 pixels (1 024 x 768 dots)

Lens

Powered zoom

1 to 1.32

Powered focus control

F=1.7 to 2.0 f=25.6 mm to 33.8 mm

Projection lamp

1 bulb x 300 W UHM lamp

Optical output

3 500 lm

1

Applicable scanning frequency

For video signal (S-video included)

Horizontally 15.73 kHz/15.63 kHz, vertically 59.94 Hz/50 Hz

For RGB signal

Horizontally 15 kHz–91 kHz, vertically 50 Hz–85 Hz,

Panasonic Intelligent Auto Scanning (PIAS) system

Dot clock frequency Less than 108 MHz

For DVI-D signal

Compliant with HDCP

2

EDID1: 480p, 576p, 720/60p, 1080/60i, 1080/50i

EDID2: VGA480/60, SVGA/60, XGA/60, XGA/70, XGA/85, SXGA/60

For YPBPR signal

[480i], horizontally 15.73 kHz, vertically 59.94 Hz

[480p], horizontally 31.5 kHz, vertically 59.94 Hz

[576i], horizontally 15.63 kHz, vertically 50 Hz

[576p], horizontally 31.25 kHz, vertically 50 Hz

[720/60p], horizontally 45 kHz, vertically 60 Hz

[1035/60i], horizontally 33.75 kHz, vertically 60 Hz

[1080/60i], horizontally 33.75 kHz, vertically 60 Hz

[1080/50i], horizontally 28.13 kHz, vertically 50 Hz

• HD/SYNC, VD terminals are not compliant with 3 value composite SYNC.

Colour system

7 standards (NTSC/NTSC4.43/PAL/PAN-N/PAL-M/SECAM/PAL60)

Screen size

50 inch–600 inch

4:3

Screen aspect ratio

Projection scheme

Menu-selectable from front/rear/ceiling mount, and floor standing

1 600:1 (when “HIGH” is selected as the “CONTRAST MODE” setting)

Contrast ratio

Interface ports

RGB1 input terminal

1 set, BNC x 5

[For YPBPR input]

Y: 1.0 V[p-p] synchronization signal included, PBPR: 0.7 V[p-p] 75 Ω

[For RGB input] 0.7 V[p-p] 75 Ω

For G-SYNC: 1.0 V[p-p] 75 Ω

HD/SYNC: TTL, high-impedance, positive/negative polarity

automatically adjusted

VD: TTL, high-impedance, positive/negative polarity automatically

adjusted

• However, HD/SYNC, and VD terminals are not compliant with 3-value

direct SYNC.