Panasonic PT-D3500E Accessories, Use only the specified battery, Do not use the old lamp unit

Page 7

When inserting the battery, make sure the polarities (+ and -) are correct.

•If the battery is inserted incorrectly, it may explode or leak, and fire, injury or contamination of the battery compartment and surrounding area may result.

•Do not use a new battery together with an old battery.

•Remove the batteries if you are not going to use the projector for a prolonged period of time.

Use only the specified battery.

•If incorrect batteries are used, they may explode or leak, and fire, injury or contamination of the battery compartment and surrounding area may result.

Do not look into the lens while the projector is being used.

• Strong light is emitted from the projector’s lens. If you look directly into this light, it can hurt and damage your eyes.

Do not use the old lamp unit.

• The lamp section may break.

When the lamp bursts, handle it properly and observe the below precautions.

•There may be shards of glass scattered inside the projector and inside the lamp unit.

•Ask the dealer to replace the lamp and inspect the inside of the projector.

•Gas and fine particles may be blown out through the ventilation holes. The gas contains mercury. If you breathe in any of the gas, or if it gets in your eyes or mouth, consult a physician immediately.

Disconnect the power cord plug from the wall outlet as a safety precaution before carrying out any cleaning.

• Electric shocks can result if this is not done.

Ask an Authorized Service Centre to clean inside the projector at least once a year.

•If dust is left to build up inside the projector without being cleaned out, it can result in fire or problems with operation.

•It is a good idea to clean the inside of the projector before the season for humid weather arrives. Ask your nearest Authorized Service Centre to clean the projector when required. Please discuss with the Authorized Service Centre regarding cleaning costs.

Do not reach for the openings beside the optical lens, during horizontal or vertical movements of the lens there is a injury hazard.

Accessories

Check that all of the accessories shown below have been included with your projector.

Remote control unit

Power cord:

Battery for remote control unit

 

Lens cover

[N2QAEA000023 x 1]

for U.K.

[R03NW/2ST x 1]

 

[TKKL5244-1 x 1]

 

 

 

 

 

[K2CT3FZ00003 x 1]

 

 

 

 

 

 

 

for Continental [K2CM3FZ00003 x 1]

ENGLISH

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Commercial Use Operating InstructionsDear Panasonic Customer Important Safety NoticeImportant the Moulded Plug U.K. only For Your SAFETY, Please Read the Following Text CarefullyContents Precautions with regard to safety Always disconnect all cables before moving the projector Do not disassemble the lamp unitDo not place liquid containers on top of the projector Do not insert any foreign objects into the projectorDo not use the old lamp unit AccessoriesUse only the specified battery Do not look into the lens while the projector is being usedPrecautions on handling Name and function of parts Set to Computer When the operation mode selectorFront and side of the projector Rear and side view of the main unit Controls on upper panel Side-mounted connection terminals Effective range of remote control operation Using the remote control unitLoading dry cells Using the remote control as a PC mouse Setting projector ID number to remote controlOperation mode selector switch Using a wired remote control Projection distances InstallationInstallation geometry Projection schemesConnection Setup precautionsControl PC DVD player Video deck Example of connecting with AV productsAudio Amplifier Digital Hi-vision video deck Speakers Example of connecting with PCs How to remove the projection lens How to install the projection lensMaking adjustment and selection Powering up the projectorRoughly adjust the focus of the lens. Refer to Direct power off function Powering off the projectorHow to adjust the lens position to the left or right How to adjust the lensChoose an item and adjust it using buttons Press the Shutter button again Automatic adjustment Auto SetupUsing the Freeze function Using the Shutter functionPress the D.ZOOM + button of the remote control Using the digital zoom D.ZOOM + functionChange the magnification with the D.ZOOM + button Structure of menu screens On-screen menusReturning to the previous Menu items settingResetting to the factory default Basic menu operationsAdjusting the picture TV-SYSTEM SharpnessAdjusting the position How to use Advanced Menu Volume Adjusting the audioAudio Mute OPTION1 settings OPTION2 settings KEY Assign PasswordFAN CONTROL2 FUNC1Text Display Setting the securityInput Password Amend PasswordConnection example Setting the networkConnecting the PC System requirementsExamples of connection Using the serial terminalsPin assignments and signal names Communication conditions Factory settingRemarks Control commandsCable specifications Connecting to a PC Computer Projector DTE specificationsPin assignments and control Using the Remote 2 terminalSub 9-pin female external appearance Indication TemperatureIndication of lamp monitor Lamp Information Checkpoint Remedial measureDismantle the air filter Cleaning and replacement of air filterProcedure of cleaning Clean the air filterReplacing the lamp unit Timing of lamp unit replacementLamp unit will be hot after it has been used Lamp unit replacement stepsHave a Phillips screwdriver ready ahead of time Replacing the lamp unit Click OK Using Web Browser ControlAccessing from the Web browser Password changeBasic control Change password button Power On/Off control Shutter controlMonitor information Detail controlFailed Occurrence of trouble Error informationWhen Failed has appeared for an item OK Normal operationLamp Runtime remaining Mail setupDNS server set up Mail setup page continuingPing test POP server setupAdjust clock Contents of mail sentNetwork status Network configCommand Control Description Remarks Using the PJLink protocolSupported commands PJLink security authenticationNot turn on Symptoms ChecksPower does Remote controlSpecifications Wireless mouse receiver Length of power supply cord CabinetOutside dimensions Remote control Power sourceCompatible Signal List Calculation formulas for projection distance by lens types Projection distances by projection lensDimensions Trademark Acknowledgement For business users in the European UnionM0605-0
Related manuals
Manual 64 pages 34.42 Kb

PT-D3500E specifications

The Panasonic PT-D3500E is a high-performance portable projector designed primarily for professional and business environments. Offering outstanding image quality, versatility, and usability, it is well-suited for a variety of applications, including conferences, classrooms, and large-scale events.

One of the standout features of the PT-D3500E is its impressive brightness, delivering up to 3,500 lumens. This ensures vibrant and vivid image reproduction, even in well-lit environments. Featuring a compact and lightweight design, the projector is easy to transport, making it a convenient choice for on-the-go presentations.

The PT-D3500E utilizes a 3LCD optical system, which guarantees excellent color accuracy and uniform brightness across the projected image. This technology works by projecting red, green, and blue light simultaneously, resulting in stunningly realistic images that capture audience attention.

Additionally, the PT-D3500E incorporates a high-resolution WUXGA (1920 x 1200) resolution, providing sharp details and clarity for both text and visuals. This level of detail is crucial for presentations where fine details can make a significant impact, ensuring that every slide is eye-catching and professional.

The projector is designed with advanced connectivity options, including HDMI, VGA, and component inputs, which allow for seamless integration with various devices. This versatility ensures compatibility with laptops, tablets, and other multimedia sources, enabling users to showcase content effortlessly.

In terms of operation, the PT-D3500E features a user-friendly interface and remote control for easy navigation and settings adjustment. The model includes a range of flexible lens options, allowing users to adapt the projector to different room sizes and layouts effectively. With a long lamp life of up to 4,000 hours in eco mode, users can rely on this projector for extended use without frequent maintenance.

The PT-D3500E also emphasizes environmental sustainability, incorporating features that reduce energy consumption and comply with international eco-friendly standards. Its robust construction ensures durability, making it a reliable choice for demanding professional use.

In conclusion, the Panasonic PT-D3500E represents a versatile, high-quality projection solution ideal for professionals seeking bright, detailed images and ease of use. With its advanced features, connectivity options, and robust design, it stands out as a top choice for various presentation needs.
Top Page Image Contents