Panasonic PT-D3500E manual Connection, Setup precautions

Page 18

Connection

Setup precautions

Before connecting any of your video/audio equipment to the projector, carefully read the owners manual supplied with the equipment once again.

All cable connections should be made with the entire system devices, including the projector, first turned off.

Obtain commercial interconnecting cables for devices supplied with no accessory or optional interconnect cables.

Video signals containing too much jitter may cause the images on the screen to randomly wobble or shake. Inserting a time base corrector (TBC) in the projector’s video line will relieve this problem.

The projector only accepts composite-video, S-video, analogue-RGB (with TTL sync. level), and digital signal from PC.

Some PC models are not compatible with the PT-D3500E projector.

The pin assignments on the S-VIDEO IN port are as follows:

Pin No.

Signal

Ground (luminance)

Ground (colour)

Luminance signal

Colour signal

Viewed from mating side

The pin assignments on the RGB2 input port are as follows:

The pin assignments on the DVI-D input port are as follows (interface with DVI-D output port on PC):

Viewed from mating side

Pin No.

Signal

Pin No.

Signal

 

T. M. D. S data 2-

 

T. M. D. S data 3+

 

T. M. D. S data 2+

 

+5 V

 

T. M. D. S data 2/4

 

Ground

 

shield

 

Hot plug sense

 

T. M. D. S data 4-

 

T. M. D. S data 0-

 

T. M. D. S data 4+

 

T. M. D. S data 0+

 

DDC clock

 

T. M. D. S data 0/5

Viewed from mating side

Pin No.

Signal

 

R/PR

 

G/G · SYNC/Y

 

B/PB

 

SDA

 

HD/SYNC

 

VD

 

SCL

DDC data

shield

 

 

 

 

T. M. D. S data 5-

 

 

 

 

T. M. D. S data 1-

T. M. D. S data 5+

T. M. D. S data 1+

T. M. D. S clock

T. M. D. S data 1/3

 

shield

shield

T. M. D. S clock+

T. M. D. S data 3-

T. M. D. S clock-

Pin : Not used.

Pins - , and : Ground.

Pins and : Valid if the PC has the corresponding function.

The DVI-D input terminal supports single link only.

EDID settings should be performed to suit the DVI equipment being connected. (Page 34)

The DVI-D input terminal can be used to connect to a DVI equipment, but note that images may not appear or the projector may not work properly when connected to certain DVI equipment.

18

Image 18
Contents Operating Instructions Commercial UseImportant Safety Notice Dear Panasonic CustomerFor Your SAFETY, Please Read the Following Text Carefully Important the Moulded Plug U.K. onlyContents Precautions with regard to safety Do not insert any foreign objects into the projector Do not disassemble the lamp unitDo not place liquid containers on top of the projector Always disconnect all cables before moving the projectorDo not look into the lens while the projector is being used AccessoriesUse only the specified battery Do not use the old lamp unitPrecautions on handling Name and function of parts When the operation mode selector Set to ComputerFront and side of the projector Rear and side view of the main unit Controls on upper panel Side-mounted connection terminals Using the remote control unit Effective range of remote control operationLoading dry cells Setting projector ID number to remote control Using the remote control as a PC mouseOperation mode selector switch Using a wired remote control Projection schemes InstallationInstallation geometry Projection distancesSetup precautions ConnectionExample of connecting with AV products Control PC DVD player Video deckAudio Amplifier Digital Hi-vision video deck Speakers Example of connecting with PCs How to install the projection lens How to remove the projection lensPowering up the projector Making adjustment and selectionRoughly adjust the focus of the lens. Refer to Powering off the projector Direct power off functionHow to adjust the lens How to adjust the lens position to the left or rightChoose an item and adjust it using buttons Using the Shutter function Automatic adjustment Auto SetupUsing the Freeze function Press the Shutter button againUsing the digital zoom D.ZOOM + function Press the D.ZOOM + button of the remote controlChange the magnification with the D.ZOOM + button On-screen menus Structure of menu screensBasic menu operations Menu items settingResetting to the factory default Returning to the previousAdjusting the picture Sharpness TV-SYSTEMAdjusting the position How to use Advanced Menu Adjusting the audio VolumeAudio Mute OPTION1 settings OPTION2 settings FUNC1 PasswordFAN CONTROL2 KEY AssignAmend Password Setting the securityInput Password Text DisplaySystem requirements Setting the networkConnecting the PC Connection exampleCommunication conditions Factory setting Using the serial terminalsPin assignments and signal names Examples of connectionConnecting to a PC Computer Projector DTE specifications Control commandsCable specifications RemarksUsing the Remote 2 terminal Pin assignments and controlSub 9-pin female external appearance Lamp Information Checkpoint Remedial measure TemperatureIndication of lamp monitor IndicationClean the air filter Cleaning and replacement of air filterProcedure of cleaning Dismantle the air filterTiming of lamp unit replacement Replacing the lamp unitLamp unit replacement steps Lamp unit will be hot after it has been usedHave a Phillips screwdriver ready ahead of time Replacing the lamp unit Password change Using Web Browser ControlAccessing from the Web browser Click OKChange password button Power On/Off control Shutter control Basic controlDetail control Monitor informationOK Normal operation Error informationWhen Failed has appeared for an item Failed Occurrence of troubleMail setup Lamp Runtime remainingMail setup page continuing DNS server set upPOP server setup Ping testContents of mail sent Adjust clockNetwork config Network statusPJLink security authentication Using the PJLink protocolSupported commands Command Control Description RemarksRemote control Symptoms ChecksPower does Not turn onSpecifications Remote control Power source Length of power supply cord CabinetOutside dimensions Wireless mouse receiverCompatible Signal List Projection distances by projection lens Calculation formulas for projection distance by lens typesDimensions For business users in the European Union Trademark AcknowledgementM0605-0
Related manuals
Manual 64 pages 34.42 Kb

PT-D3500E specifications

The Panasonic PT-D3500E is a high-performance portable projector designed primarily for professional and business environments. Offering outstanding image quality, versatility, and usability, it is well-suited for a variety of applications, including conferences, classrooms, and large-scale events.

One of the standout features of the PT-D3500E is its impressive brightness, delivering up to 3,500 lumens. This ensures vibrant and vivid image reproduction, even in well-lit environments. Featuring a compact and lightweight design, the projector is easy to transport, making it a convenient choice for on-the-go presentations.

The PT-D3500E utilizes a 3LCD optical system, which guarantees excellent color accuracy and uniform brightness across the projected image. This technology works by projecting red, green, and blue light simultaneously, resulting in stunningly realistic images that capture audience attention.

Additionally, the PT-D3500E incorporates a high-resolution WUXGA (1920 x 1200) resolution, providing sharp details and clarity for both text and visuals. This level of detail is crucial for presentations where fine details can make a significant impact, ensuring that every slide is eye-catching and professional.

The projector is designed with advanced connectivity options, including HDMI, VGA, and component inputs, which allow for seamless integration with various devices. This versatility ensures compatibility with laptops, tablets, and other multimedia sources, enabling users to showcase content effortlessly.

In terms of operation, the PT-D3500E features a user-friendly interface and remote control for easy navigation and settings adjustment. The model includes a range of flexible lens options, allowing users to adapt the projector to different room sizes and layouts effectively. With a long lamp life of up to 4,000 hours in eco mode, users can rely on this projector for extended use without frequent maintenance.

The PT-D3500E also emphasizes environmental sustainability, incorporating features that reduce energy consumption and comply with international eco-friendly standards. Its robust construction ensures durability, making it a reliable choice for demanding professional use.

In conclusion, the Panasonic PT-D3500E represents a versatile, high-quality projection solution ideal for professionals seeking bright, detailed images and ease of use. With its advanced features, connectivity options, and robust design, it stands out as a top choice for various presentation needs.