Panasonic TQBJ0299-3 Connecting example Computers, Connecting example AV equipment, Connections

Connections

Connecting example: Computers

Control Computers

Projector 1 Projector 2

Control

NOTE:

•For the specifications of the RGB signals that can be applied from the computer, see the data sheet of the operating instructions that is provided with the projector.

•If your computer has the resume feature (last memory), the computer may not function properly until the resume capability is disabled.

•When the SYNC ON GREEN signal is input, do not input sync signals to the SYNC/HD and VD terminals.

•When using DVI-D input, EDID settings may be required for the connected device. See “DVI-D IN” on page 26.

Connecting example: AV equipment

Connecting with VIDEO IN/S-VIDEO IN

Control VCR

HDMI equipped

DVD player (HDCP)

Getting Started

NOTE:

•When connecting with a VCR, be sure to use the one with a built-in time base corrector (TBC) or use a TBC between the projector and the VCR.

•If non-standard burst signals are connected, the image may be distorted. If this is the case, connect a TBC between the projector and the VCR.

•The DVI-D signals input terminal supports only a single link.

•The HDMI - DVI-D conversion cable is required to connect an HDMI compliant device.

•It is possible to connect the DVI-D input terminal with an HDMI- or DVI-D compliant device, but with some devices the images may not appear or other problems may be encountered in operation.

ENGLISH - 11