Panasonic TQBJ0299-3 manual Auto Setup, Dvi-D, Sdi, ON-SCREEN Display

DISPLAY OPTION menu

Settings

AUTO SETUP

You can change the AUTO SETUP feature for specific signals. Press I H to cycle through the options and press the ENTER button to perform the AUTO SETUP.

	For 4:3 or 5:4 signals
	Applicable resolution: 640 x 400, 640 x480,
DEFAULT	800 x 600, 832 x 624, 960 x 720, 1 024 x 768,
	1 152 x 864, 1 152 x 870, 1 280 x 960,
	1 280 x 1 024, 1 600 x 1 200, 1 400 x 1 050
	For wide signals
WIDE	Applicable resolution: 720 x 400, 848 x 480,
	1 280 x 720, 1 024 x 600, 1 120 x 750,
	1 440 x 900, 1 680 x 1 050
	For specific resolution signals
USER	Select the required MODE and change the
	DISPLAY DOTS value by pressing I H.

DVI-D IN

NOTE:

•The DVI-D IN setting for the best quality depends on the output equipment. Refer the instructions of the connected equipment.

•DVI signal is very sensitive, and malfunction may occur or other problems could be encountered with some DVI equipment.

DVI EDID

You can switch the EDID setting and signal level for variable DVI signals.

EDID3	Switch between fine settings for a
	moving image and for a still image.
	Fine setting for mainly a moving
EDID1	image, such as signals from a DVD
	player.
EDID2(PC)	Fine setting for mainly a still image,
	such as computer.
DVI SIGNAL LEVEL
0-255:PC	(PC scale) For connecting to a
	computer via DVI-D IN terminal
	(TV scale) For connecting to AV
16-235	equipment via DVI-D IN terminal, such
	as a DVI - HDMI conversion cable
	connection

SDI IN

(PT-DZ6710 only)

You can select signal amplitude type.

64-940	Normal setting
4-1019	For when grey colour is too close to
	black

ON-SCREEN DISPLAY

OSD POSITION

You can change the displaying position of the main menu. Press I H to cycle through the options.

1	4	7
Upper left	Upper centre	Upper right
2	5	8
Left	Centre	Right
3	6	9
Lower left	Lower centre	Lower right

OSD DESIGN

You can change the background colour of the menu. Press I H to select the required option.

1	Yellow	4	Green
2	Blue	5	Pink
3	White	6	Brown

OSD MEMORY

The current menu cursor position will be retained temporarily unless the projector switched off.

ON	Memorise the menu cursor position.
OFF	Reset the cursor position.

INPUT GUIDE

The name of current selected input terminal will be displayed where the position that is selected in OSD POSITION.

ON	Displays the current selected input
	terminal.
OFF	Deactive

WARNING MESSAGE

You can prevent the display of waning messages.

ON	All of the warning messages will be
	displayed.
OFF	None of the warning messages will be
	displayed.

NOTE:

•When the WARNING MESSAGE is set to OFF, use the projector with utmost care due to none of the warning messages will be displayed.

NOTE:

•Available with YPBPR or RGB of HD-SDI signal.

•Usually 64-940setting is recommended.

ENGLISH - 26