Panasonic TQBJ0299-3 manual Signal List, Managing the sub memory list

Page 34

SIGNAL LIST

Managing the sub memory list		Displaying the sub memory list and
You can restore the sub memory data when using		restoring the settings
signals from the same input source. Sub memory data	1.	Press I or H while the menu is cleared from the screen
contains the setting information of screen and image		after adjustment.
adjustments, such as BRIGHTNESS, CONTRAST or		Displays the SUB MEMORY LIST.
ASPECT.	2.	Select the required sub memory data and press the
Registering the current settings to the		ENTER button.
Registering the current settings to the		Displays the REGISTERED SIGNAL STATUS.
list	3.	Press the ENTER button.
1. Press I or H while the menu is cleared from the screen		Restores the settings in the data.
1. Press I or H while the menu is cleared from the screen		Deleting a sub memory data
after adjustment.		Deleting a sub memory data

The signal must be registered before creating a sub memory data of the signal.

Displays the list of corresponding sub memory data to the signal.

If the creating data is the first sub memory data of the signal, the status of the signal will be displayed to confirm.

2.Select an empty data slot to register and press the ENTER button.

Displays the REGISTERED SIGNAL STATUS and change the name if necessary.

You can return to the previous step by pressing the MENU button.

1.Press I or H while the menu is cleared from the screen after adjustment.

Displays the SUB MEMORY LIST.

2.Select the required sub memory data and press the ENTER button.

Displays the REGISTERED SIGNAL STATUS.

3.Press the DEFAULT button.

Displays the SUB MEMORY LIST with change.

You can return to the previous step by pressing the MENU button.

Settings

3. Select OK and press the ENTER button.

Displays sub memory status and return to the projection. MEMORY NO. indicates as follows.

A5 (1-2)


Location		address						Sub memory		number:

NOTE:

•The memories are numbered over 12 pages (A to L: 8 data items can be registered on each page), and the data is registered in the unused memory with the lowest number. If all the memories are used, the data of the old signals is overwritten in sequence.

ENGLISH - 34

Image 34

Contents PT-DZ6700 PT-DW6300 PT-D6000 PT-D5000 Contents Projection distance Setting upScreen size and throw distance Height of the projection areaSetting up Projection distance by projection lens PT-DZ6710/PT-DZ6700Setting up PT-DW6300PT-D6000/PT-D5000 Through ratio FixedPT-DW6300 PT-DZ6710/PT-DZ6700PT-D6000/PT-D5000 Screen Geometric adjustmentScreen Side viewFront leg adjusters and throwing angle Connections Pin assignments and signal namesBefore connection to the projector Connecting with Video IN/S-VIDEO Connecting example ComputersConnecting example AV equipment ConnectionsMenu Navigation Main menu and Sub-menuDisplay Option Signal List Projector SetupMenu Navigation Test PatternSecurity Navigating through the menu Adjusting with the bar scale itemsOperating procedure Displaying the main menuPicture menu System Daylight View White GainNoise Reduction SharpnessAspect Position menuShift Aspect ratio optionsZoom Clock PhaseGeometry Position menu Vertical Keystone Lens Throw RatioKeystone Digital Cinema Reality Input ResolutionSetting range BlankingEdge Blending Adjusting with colour markersAdjusting Edge Blending Selecting gamma levelRaster Position Adjusting brightness around borderline of the image areaBright adjustment right Marker Projection rangeDisplay Option menu SDI Auto SetupDVI-D ON-SCREEN DisplayFreeze Back ColorStartup Logo Side by SideHigh Altitude Mode Projector Setup menuInstallation Projector IDREMOTE2 Mode Lamp PowerStandby Mode Lamp SelectStatus Filter Counter ResetNo Signal SHUT-OFF Function ButtonSave ALL Users Data Service PasswordDate and Time InitializeSelect Test Pattern menu Test PatternPress I H to select the required test pattern Signal List and SUB Memory List Managing the list and the registered dataSignal List Managing the sub memory listDisplay Setting Security Password ChangeSecurity Password Security menuRemote Controller Menu Lock PasswordControl Device Setup Menu LockNetwork Control Network SetupNetwork menu Network StatusNetwork connection Technical InformationLAN terminal Administrator mode Accessing with the web browserChange password Technical InformationDetail control User modeBasic control User accountAdjust clock Detailed set upNetwork config Authentication set upMail set up Mail report sample Error report sampleProjector status Error informationStatus Click DetailPJLink security authorization Control commandsPJLinkTMprotocol Serial terminal Pin assignments and signal namesCommunication settings ConnectionCable specifications Technical Information Basic formatOther Remote 2 in terminalPin assignments and control ContactSide by Side function signal combination table Side by Side function signal combination tableRestoring the Menu Lock Password to default Movie signalsTrademark acknowledgements Index Index Combination table