Panasonic PT-FW100NTU Connections, Before connection to the projector, Connecting with computers

Page 18

Getting Started

Connections

Before connection to the projector

Read and follow the operating and connecting instructions of each peripheral device. The peripheral devices must be turned off.

Use cables that match each peripheral device to be connected.

If the input signal is affected by signal jitter, the projected image may have poor image quality and timebase correction is effective.

Confirm the type of video signals. See “List of compatible signals” on page 44.

Connecting with computers

Computers

Monitor

RGB signal cable

LAN cable(Commercial) (Commercial)

Computer for	Audio system
controlling

NOTE:

•When COMPUTER2 SELECT in the OPTION menu is set to OUTPUT, do not connect any input signals.

•See CD-ROMcontents for the LAN network connection.

LAN terminal

ACT lamp (Green)

Flashes when transmit data.

LINK lamp (Yellow)

Illuminates when a LAN cable is connected.

NOTE:

• Do not touch the metal parts of the LAN terminal. Failure to observe this may cause malfunction by static electricity.

ENGLISH - 18

Image 18

Contents Model No. PT-FW100NTU Important Safety Notice Important InformationPT-FW100NTU Trade Name Important Safety NoticeDeclaration of Conformity PanasonicContents Contents SettingsMaintenance AppendixPrecautions with regard to safety Do not look into the lens while the projector is being used Precautions with regard to safetyDo not set up the projector outdoors Use only the specified batteriesDo not mix old and new batteries Remove the used batteries from the remote control promptlyDo not put your weight on this projector Electric shocks can result if this is not doneAccessories Minimum required setting screen Read this firstPreparation Remote control About Your ProjectorTop and front view Projector bodyAbout Your Projector Control panelAbout Your Projector Back and bottom view Computer. Selectable for inputOutput by menu operation Screen size and throw distance Setting upCalculation methods for screen dimensions Getting StartedProjection method Front leg adjusters and throwing angleSetting up Mounting in the ceiling and projecting from frontHorizontal shift Adjusting the Lens shift leverLens shift and positioning Vertical shiftSetting up Projector location range When the screen position is fixedWhen the projector position is fixed Before connection to the projector Connecting with computersConnections LAN terminalConnecting with Component Connecting with AV equipmentConnecting with Video IN/S-VIDEO ConnectionsSwitching the projector on/off Power cordPower indicator Switching the projector on/off Switching on the projectorSwitching off the projector Switch the Main Power on Press the Power buttonPositioning the image Selecting the input signalProjecting an image Focus lever Zoom leverOperating range Remote control operationSetting up the image position automatically OperationSwitching the input signal Using the laser pointerCapturing an image Resetting to the factory default settingsProjecting an image in INDEX-WINDOW mode Stopping the projection temporaryControlling the volume of the speaker Projecting 2 images at a timeEnlarging the centred area Navigating through the Menu Adjusting with the bar scale itemsMenu Navigation Displaying the Main menuMain menu and Sub-menu Menu NavigationWEB Control Live Mode CUT Status Initialize Password Change Network StandbyContents 169 1610Picture menu Detailed Setup For S-VIDEO/VIDEO signalsFor RGB signals Position menu Screen Format menu Aspect ratio depend on signalsFrame Lock OptionOption menu Signal Search Power OFF TimerAuto Setup Direct Power onHighland Closed CaptionTest Pattern Security menu Input PasswordPassword Change Text DisplayNetwork menu Items in Network menuNetwork menu, the following items are available Lamp indicator TEMP, Lamp and Filter IndicatorsManaging the indicated problems Temp indicatorCare and Replacement Cleaning the projectorReplacing the ARF Auto Rolling Filter Replacing the Lamp unit Care and Replacement Resetting the FilterWhen to replace the Lamp unit Before replacing the Lamp unitInstalling the safety cable Ceiling mount bracket safeguardsCare and Replacement Replacement procedure Removing and replacing the lamp unitTroubleshooting Quality *2 List of compatible signalsTechnical Information Dots *1 KHz MHzSerial terminal Computer connection guidance Technical Information Cable specificationsControl commands ProjectorInput signal Lamp switchingSwitching input Signals Remote terminalSpecifications Audio COMPONENT1OUT Computer AudioScreen size and throw distance for 169 aspect ratio Screen size and throw distance for 43 aspect ratioUnit mm DimensionsTrademark acknowledgements These Operating Instructions are printed on recycled paperCalculation methods IndexALS Ambient Luminance Sensor ARF Auto Rolling Filter LeverNavigation buttons IndexMains lead Screen sizeAvis important concernant la sécurité Imformation ImportanteNuméro de série Avertissement Avis important concernant la sécuritéInformation Importante AdvertenciaPrécautions de sécurité AvertissementMises EN Garde Précautions de sécuritéUtiliser uniquement les piles spécifiées Ne pas mélanger des piles usées et des piles neuvesSinon cela peut causer des chocs électriques Précautions lors de linstallation Précautions lors du transportPrécautions lors de lutilisation Remplacement de lunité de la lampe Délai de remplacement de lUnité de la lampeAvant de remplacer le lUnité de la lampe Retirer et remplacer la lampe Installation du câble de sécuritéProtections du support de montage au plafond De lUnité dePanasonic Projector Systems Company Technical Support