Panasonic PT-FW100NTU manual Switching on the projector, Switching off the projector

Page 21

Switching the projector on/off

Switching on the projector

1.	Switch the MAIN POWER on.	3. Press the POWER button.
	The power indicator lights up in RED.	The power indicator lights up in GREEN after
2.	Open the Front panel cover.	flashing for a while.
	This is not necessary in Remote control operation.	The STARTUP LOGO is displayed on the screen.
		See “STARTUP LOGO” on page 34.

NOTE:

•When starting up the projector some small rattling or tinkling sound may be heard, or the display may flicker for the characteristics of the lamp. Those are normal and do not affect the performance of the projector.

•If you disconnected the Power cord or switched off the MAIN POWER while on projecting mode, the projection will start with connecting the Power cord or switching on the MAIN POWER. See “DIRECT POWER ON” on page 35.

Switching off the projector

Basic Operation

1.Open the Front panel cover.

This is not necessary in Remote control operation.

2. Press the POWER button.

The confirmation screen is displayed. It will disappear and return to the projection after 10 seconds without any operation.

To return to the projection, press any button except the POWER button.

3. Press the POWER button.

The power indicator lights up in ORANGE while cooling the lamp, then illuminates RED when is ready to switch off the MAIN POWER.

4.Switch off the MAIN POWER on the back of the projector.

NOTE:

•Press the POWER twice or for a long duration to switch the power off.

•You can disconnect the Power cord or switch off the MAIN POWER instead of following this procedure. See “DIRECT POWER ON” on page 35.

•You can turn off the projector by pressing the POWER button longer than 0.5 seconds.

ENGLISH - 21

Image 21

Contents Model No. PT-FW100NTU Important Safety Notice Important InformationPT-FW100NTU Declaration of Conformity Important Safety NoticeTrade Name PanasonicContents Maintenance SettingsContents AppendixPrecautions with regard to safety Do not set up the projector outdoors Precautions with regard to safetyDo not look into the lens while the projector is being used Use only the specified batteriesDo not put your weight on this projector Remove the used batteries from the remote control promptlyDo not mix old and new batteries Electric shocks can result if this is not doneAccessories Minimum required setting screen Read this firstPreparation About Your Projector Remote controlAbout Your Projector Projector bodyTop and front view Control panelAbout Your Projector Back and bottom view Computer. Selectable for inputOutput by menu operation Calculation methods for screen dimensions Setting upScreen size and throw distance Getting StartedSetting up Front leg adjusters and throwing angleProjection method Mounting in the ceiling and projecting from frontLens shift and positioning Adjusting the Lens shift leverHorizontal shift Vertical shiftSetting up Projector location range When the screen position is fixedWhen the projector position is fixed Connections Connecting with computersBefore connection to the projector LAN terminalConnecting with Video IN/S-VIDEO Connecting with AV equipmentConnecting with Component ConnectionsSwitching the projector on/off Power cordPower indicator Switching off the projector Switching on the projectorSwitching the projector on/off Switch the Main Power on Press the Power buttonProjecting an image Selecting the input signalPositioning the image Focus lever Zoom leverSetting up the image position automatically Remote control operationOperating range OperationUsing the laser pointer Switching the input signalProjecting an image in INDEX-WINDOW mode Resetting to the factory default settingsCapturing an image Stopping the projection temporaryControlling the volume of the speaker Projecting 2 images at a timeEnlarging the centred area Menu Navigation Adjusting with the bar scale itemsNavigating through the Menu Displaying the Main menuMenu Navigation Main menu and Sub-menuContents Password Change Network StandbyWEB Control Live Mode CUT Status Initialize 169 1610Picture menu Detailed Setup For S-VIDEO/VIDEO signalsFor RGB signals Position menu Frame Lock Aspect ratio depend on signalsScreen Format menu OptionOption menu Auto Setup Power OFF TimerSignal Search Direct Power onHighland Closed CaptionTest Pattern Password Change Input PasswordSecurity menu Text DisplayNetwork menu Items in Network menuNetwork menu, the following items are available Managing the indicated problems TEMP, Lamp and Filter IndicatorsLamp indicator Temp indicatorCare and Replacement Cleaning the projectorReplacing the ARF Auto Rolling Filter When to replace the Lamp unit Care and Replacement Resetting the FilterReplacing the Lamp unit Before replacing the Lamp unitCare and Replacement Replacement procedure Ceiling mount bracket safeguardsInstalling the safety cable Removing and replacing the lamp unitTroubleshooting Technical Information List of compatible signalsQuality *2 Dots *1 KHz MHzSerial terminal Control commands Technical Information Cable specificationsComputer connection guidance ProjectorSwitching input Signals Lamp switchingInput signal Remote terminalSpecifications OUT COMPONENT1Audio Computer AudioScreen size and throw distance for 43 aspect ratio Screen size and throw distance for 169 aspect ratioTrademark acknowledgements DimensionsUnit mm These Operating Instructions are printed on recycled paperALS Ambient Luminance Sensor ARF Auto Rolling Filter IndexCalculation methods LeverMains lead IndexNavigation buttons Screen sizeAvis important concernant la sécurité Imformation ImportanteNuméro de série Information Importante Avis important concernant la sécuritéAvertissement AdvertenciaAvertissement Précautions de sécuritéPrécautions de sécurité Mises EN GardeUtiliser uniquement les piles spécifiées Ne pas mélanger des piles usées et des piles neuvesSinon cela peut causer des chocs électriques Précautions lors de linstallation Précautions lors du transportPrécautions lors de lutilisation Remplacement de lunité de la lampe Délai de remplacement de lUnité de la lampeAvant de remplacer le lUnité de la lampe Protections du support de montage au plafond Installation du câble de sécuritéRetirer et remplacer la lampe De lUnité deTechnical Support Panasonic Projector Systems Company