Panasonic PT-FW100NTU manual TEMP, Lamp and Filter Indicators, Managing the indicated problems

Page 39

TEMP, LAMP and FILTER Indicators

Managing the indicated problems

If a problem should occur with the projector, the TEMP, LAMP and/or

 

FILTER indicators will inform you. Manage the indicated problems as

 

follow.

 

1.

Confirm the status of all indicators and projector, and switch off the

 

 

projector in proper way.

 

2.

Find out the cause of the problem by status of the TEMP, LAMP

POWER LAMP TEMP FILTER

 

and/or FILTER indicators.

3.

Follow the instruction for each indication below and solve the

 

 

problem.

 

4.Turn on the projector in the correct way and confirm the indicator is not indicating a problem any longer.

NOTE:

• If no problem is found or the problem remains, do not turn on the projector. Instead contact an Authorized Service Center.

LAMP indicator

Indicator

Illuminating RED

Flashing RED

 

 

 

 

 

 

 

Problem

LAMP RUNTIME has

LAMP circuit failure, abnormal function or Lamp unit is damaged.

reached 2 800 hours.

 

 

 

 

 

Lamp unit will run out

The MAIN POWER is

LAMP circuit failure,

Lamp unit is

 

switched on again

Cause

soon and needs to be

before the Lamp unit

abnormal function.

damaged.

 

replaced.

 

is cooled enough.

 

 

 

 

 

 

 

See “Replacing the

Let the Lamp unit cool

Contact an Authorized

See “Replacing the

Remedy

Lamp unit” on page 41.

down and turn on the

Service Center.

Lamp unit” on page 41.

 

 

MAIN POWER.

 

 

TEMP indicator

Indicator

Illuminating RED and still projecting

 

 

Flashing RED and POWER is turned off

 

 

 

 

 

Problem

The temperature inside and/or outside the projector is abnormally high.

 

 

 

 

 

 

Cause

The ventilation

The room temperature

The ARF is excessively

The projector is located

openings are covered.

is too high.

dirty and the ventilation

at high elevations

 

is poor.

(above 1 400 m).

 

 

 

 

Remove the object(s)

Reinstall the projector

Replace the ARF in the

Turn on the projector*1

Remedy

from the ventilation

in temperature

proper method. See

and set the

openings or clear

controlled place. See

HIGHLAND to ON.

 

page 40.

 

around the projector.

page 48.

See page 36.

 

 

 

 

 

 

 

*1. The projector will perform only 2 minutes with OFF setting at high elevation.

FILTER indicator

When the FILTER indicator is flashing GREEN, the ARF is normally rolling up.

Indicator

Illuminating RED

Flashing RED

Illuminating ORANGE

Flashing ORANGE

 

 

 

 

 

 

FILTER REMAINING

The projector cannot

The ARF cannot

FILTER REMAINING

Problem

has turned red. See

has turned yellow. See

detect the ARF.

operate properly.

 

page 34.

page 34.

 

 

 

 

 

 

Foreign object is

 

Cause

ARF has been run out.

ARF is not attached.

blocking the ARF

ARF is running out.

 

 

 

operation.

 

 

See “Replacing the

 

Remove the foreign

Prepare the ARF for

 

 

object or contact an

Remedy

ARF (Auto Rolling

Attach the ARF.

Authorized Service

replacement.

 

Filter)” on page 40.

 

 

 

Center.

 

 

 

 

 

 

 

 

 

 

Maintenance

ENGLISH - 39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Model No. PT-FW100NTU Important Safety Notice Important InformationPT-FW100NTU Panasonic Important Safety NoticeDeclaration of Conformity Trade NameContents Appendix SettingsMaintenance ContentsPrecautions with regard to safety Use only the specified batteries Precautions with regard to safetyDo not set up the projector outdoors Do not look into the lens while the projector is being usedElectric shocks can result if this is not done Remove the used batteries from the remote control promptlyDo not put your weight on this projector Do not mix old and new batteriesAccessories Minimum required setting screen Read this firstPreparation About Your Projector Remote controlControl panel Projector bodyAbout Your Projector Top and front viewAbout Your Projector Back and bottom view Computer. Selectable for inputOutput by menu operation Getting Started Setting upCalculation methods for screen dimensions Screen size and throw distanceMounting in the ceiling and projecting from front Front leg adjusters and throwing angleSetting up Projection methodVertical shift Adjusting the Lens shift leverLens shift and positioning Horizontal shiftSetting up Projector location range When the screen position is fixedWhen the projector position is fixed LAN terminal Connecting with computersConnections Before connection to the projectorConnections Connecting with AV equipmentConnecting with Video IN/S-VIDEO Connecting with ComponentSwitching the projector on/off Power cordPower indicator Switch the Main Power on Press the Power button Switching on the projectorSwitching off the projector Switching the projector on/offFocus lever Zoom lever Selecting the input signalProjecting an image Positioning the imageOperation Remote control operationSetting up the image position automatically Operating rangeUsing the laser pointer Switching the input signalStopping the projection temporary Resetting to the factory default settingsProjecting an image in INDEX-WINDOW mode Capturing an imageControlling the volume of the speaker Projecting 2 images at a timeEnlarging the centred area Displaying the Main menu Adjusting with the bar scale itemsMenu Navigation Navigating through the MenuMenu Navigation Main menu and Sub-menu169 1610 Password Change Network StandbyContents WEB Control Live Mode CUT Status InitializePicture menu Detailed Setup For S-VIDEO/VIDEO signalsFor RGB signals Position menu Option Aspect ratio depend on signalsFrame Lock Screen Format menuOption menu Direct Power on Power OFF TimerAuto Setup Signal SearchHighland Closed CaptionTest Pattern Text Display Input PasswordPassword Change Security menuNetwork menu Items in Network menuNetwork menu, the following items are available Temp indicator TEMP, Lamp and Filter IndicatorsManaging the indicated problems Lamp indicatorCare and Replacement Cleaning the projectorReplacing the ARF Auto Rolling Filter Before replacing the Lamp unit Care and Replacement Resetting the FilterWhen to replace the Lamp unit Replacing the Lamp unitRemoving and replacing the lamp unit Ceiling mount bracket safeguardsCare and Replacement Replacement procedure Installing the safety cableTroubleshooting Dots *1 KHz MHz List of compatible signalsTechnical Information Quality *2Serial terminal Projector Technical Information Cable specificationsControl commands Computer connection guidanceRemote terminal Lamp switchingSwitching input Signals Input signalSpecifications Computer Audio COMPONENT1OUT AudioScreen size and throw distance for 43 aspect ratio Screen size and throw distance for 169 aspect ratioThese Operating Instructions are printed on recycled paper DimensionsTrademark acknowledgements Unit mmLever IndexALS Ambient Luminance Sensor ARF Auto Rolling Filter Calculation methodsScreen size IndexMains lead Navigation buttonsAvis important concernant la sécurité Imformation ImportanteNuméro de série Advertencia Avis important concernant la sécuritéInformation Importante AvertissementAvertissement Précautions de sécuritéPrécautions de sécurité Mises EN GardeUtiliser uniquement les piles spécifiées Ne pas mélanger des piles usées et des piles neuvesSinon cela peut causer des chocs électriques Précautions lors de linstallation Précautions lors du transportPrécautions lors de lutilisation Remplacement de lunité de la lampe Délai de remplacement de lUnité de la lampeAvant de remplacer le lUnité de la lampe De lUnité de Installation du câble de sécuritéProtections du support de montage au plafond Retirer et remplacer la lampeTechnical Support Panasonic Projector Systems Company
Top Page Image Contents