Removing and Attaching the Carrying Handle
The LCD Projector Carrying Handle can be removed and | Lock Ring |
attached. When the Projector is set up so that it need not be |
|
moved, you can improve the appearance of the Projector by |
|
removing the handle. |
|
Please follow the instructions below to remove and attach |
|
the carrying handle. |
|
| Carrying Handle |
When Removing the Carrying Handle
1 Hold in the two lock buttons, located on the Lock Ring at the base of the handle as shown.
Note
• Remove the handle while in the raised position. Removal is difficult if in the lowered position.
2 Turn the Lock Ring to the left so that the ▲ mark points to RELEASE on the LCD Projector.
3
4 Slowly pull the carrying handle straight out from the LCD Projector.
When Attaching the Carrying Handle
1 Insert the carrying handle into the LCD Projector so that the ▲ mark on the Lock Ring is aligned with RELEASE on the LCD Projector.
2 Hold in the two lock buttons, located on the Lock Ring at the base of the handle as shown.
3 Turn the Lock Ring to the right so the ▲ mark points to LOCK on the LCD Projector and you hear it click into the locked position. (The Lock Ring is locked.)
4 Repeat steps 1 and 2 and remove the other Lock Ring.
Note
•Attach the carrying handle securely. If you carry the LCD Projector with the carrying handle improperly attached, the handle could come off and you sometimes cause injury.
49