Panasonic PT-L712NTE Make the following settings # Select Setting, $ Setting Name, Create, Delete

Page 38

Make the following settings.

# Select Setting

If creating several network settings, use the G button to select a setting.

$ Setting Name

Lets you type a name for the network setting.

(Example) LAN1

%Create

Creates a new network setting.

&Delete

Deletes the currently-displayed network setting.

( Copy

Creates a new network setting and copies the contents of the currently-displayed network setting to the new setting.

) NIC (Network Interface Card) Selects the wireless card to be used.

*LAN card’s number

Type in the last digit of the product number for the wireless card that you are using (see page 5).

TCP/IP

+Use DHCP

Select if you would like to assign an IP address so that the computer

can use a DHCP server.

-IP address

Type in the computer’s IP address. The computer’s IP address cannot be the same as the projector’s IP address or another computer’s IP address.

Refer to page 14 of “Wireless function preparation” while making this setting.

. Subnet Mask

Type in the subnet mask.

Refer to page 14 of “Wireless function preparation” while making this setting.

/Gateway

Type in the gateway address.

This setting is not required for communication with the projector.

This setting is not compatible with the metric settings for Windows 2000. If metric settings are required, make the setting using the “Advanced TCP/IP settings” window in Windows 2000.

-38-

Image 38

Contents Operating Instructions LCD Projector Commercial UseContents Do not insert any foreign objects into the card slot Safety PrecautionsDear Panasonic Customer Radio frequencies used by the wireless card Do not use the cards near other sources of radio emissionsAvailable channels EtsiWireless card Check accessoriesWireless card slot Names of each partWireless image transfer system for the projector System diagramTransferable images Main functions of the application software Software FunctionsSubnet Mask Explanation of termsIP Address GatewayAccess Point Ad Hoc ModeInfrastructure Mode ChannelJpeg PowerPoint ExifSetting procedure Wireless function preparationFirstly, when using the wireless function Setting exampleComputerProjectorComputer LAN Page # Turn off the power supply for the projector Installing and removing the wireless cardInserting the wireless card Close the slot coverPush in the eject switch and then remove the wireless card Removing the wireless card$ Open the slot cover Press the eject switch On-screen menus List of menu screensProjector LAN settings LAN SetupLock Setup $ Mode ChannelSsid Subnet Mask KEY Installing the wireless card Setting up the computer wireless cardInstalling and removing the computer’s wireless card For Windows Installing the driverRemoving the wireless card Click OK without changing any of the detailed settings Click FinishClick Yes. The computer will then re-start Checking the protocol Click YesPage Click OK + Click Yes. The computer will then Re-start Page Installing the Configuration Utility Click CloseStarting and closing the Wireless Manager Using the Wireless ManagerWireless Manager capabilities Displaying the Configuration UtilityComputer network settings Create Make the following settings # Select Setting$ Setting Name DeleteWireless LAN ModeChecking communication with the projector Basic image transmission examples Example 2 Projecting already-existing imagesFunctions of the Capture window Before transmitting imagesCapturing and transmitting computer screen images Selecting the capturing method Close button$ Right-click the icon on the taskbar, and select Capture Full Screen captureArea capture Active Window capture Click Capture Start Select the window to be captured. NoteSetting the capturing conditions Transmitting existing images Functions in the Image List windowBasic operations # Number of Loops Using Auto Play to play images in a specified orderImage List status settings $ IntervalOther useful Wireless Manager functions Shortcut Key AssignmentEncryption settings Using Jpeg Convertor What Jpeg Convertor can doStarting Jpeg Convertor Main screen functionsMinimize button + Picture quality sliderSave to SD Memory Card button Maximize buttonQuality Importing files using drag-and-drop Images which cannot be importedSorting images Checking, sorting and deleting imagesChecking images Double click on the image you wish to checkConversion settings for saving images Deleting imagesConverted size list box Saving to other foldersSave as different size check box Picture quality sliderFile names DCF standardLimits on directory names File formatSymptom Check the following Using the Serial connectorBefore asking for service Message ListSymptom Check the following Symptom Check the following Specifications PAL-N / SecamSync Wireless card OptionsDimensions Trademark InformationMade in Japan S0801-2081C