Panasonic PT-L712NTE manual ComputerProjectorComputer

Page 15

(2) If already using computers for wireless transmission (Ad Hoc mode)

Use the existing wireless cards for the computers to carry out direct wireless communication with the projector in Ad Hoc mode.

ComputerProjectorComputer

Setting procedure

Set the computer and the projector according to the following procedure.

Preparation &

 

 

Checkcommunication

 

 

Transmit

settings

 

 

 

 

 

 

images

<Projector>

 

 

<Computer>

 

 

<Computer>

Inserting the

 

 

Use Wireless

 

 

Use Wireless

wireless card (page

 

 

 

Manager to check

 

 

 

Manager to

 

 

 

 

 

 

18)

 

 

 

communication with

 

 

transmit the

LAN settings (page

 

 

 

the projector (page

 

 

images (page

21)

 

40)

 

41)

 

 

 

 

 

 

 

 

 

Setting example

Setting item

Projector LAN settings

IP ADDRESS

Set the computer IP address to an address with the

 

last number different.

 

e.g. If the computer IP address is 192.168.10.11, set

 

the projector’s address to something like

 

192.168.10.12.

SUBNET MASK

Use the same setting for the computer.

MODE

AD HOC

CHANNEL

Use the same setting for the computer.

Note:

•The computer settings can be used without further changes. However, if using the WEP function, communication with the projector will not be possible. You will first need to turn off the WEP function for all computers which are to communicate with the projector.

Furthermore, when the WEP function is turned off, the data encryption function will also be turned off, so it is recommended that you use a feature such as the Sharing Settings for folders to set password protection for your data. Ask your network administrator for further details.

•If you any wireless cards other than the optional ET-CDWL1 series, correct operation cannot be guaranteed.

-15-

Page 14 Page 16
Image 15
Page 14 Page 16
Contents LCD Projector Commercial Use Operating InstructionsContents Safety Precautions Dear Panasonic CustomerDo not insert any foreign objects into the card slot Do not use the cards near other sources of radio emissions Radio frequencies used by the wireless cardEtsi Available channelsNames of each part Check accessoriesWireless card slot Wireless cardSystem diagram Wireless image transfer system for the projectorTransferable images Software Functions Main functions of the application softwareGateway Explanation of termsIP Address Subnet MaskChannel Ad Hoc ModeInfrastructure Mode Access PointJpeg Exif PowerPointSetting example Wireless function preparationFirstly, when using the wireless function Setting procedureComputerProjectorComputer LAN Page Close the slot cover Installing and removing the wireless cardInserting the wireless card # Turn off the power supply for the projectorRemoving the wireless card $ Open the slot cover Press the eject switchPush in the eject switch and then remove the wireless card List of menu screens On-screen menusLAN Setup Projector LAN settingsLock Setup Channel $ ModeSsid Subnet Mask KEY Setting up the computer wireless card Installing and removing the computer’s wireless cardInstalling the wireless card Installing the driver Removing the wireless cardFor Windows Click Finish Click OK without changing any of the detailed settingsClick Yes. The computer will then re-start Click Yes Checking the protocolPage Click OK + Click Yes. The computer will then Re-start Page Click Close Installing the Configuration UtilityDisplaying the Configuration Utility Using the Wireless ManagerWireless Manager capabilities Starting and closing the Wireless ManagerComputer network settings Delete Make the following settings # Select Setting$ Setting Name CreateMode Wireless LANChecking communication with the projector Example 2 Projecting already-existing images Basic image transmission examplesBefore transmitting images Capturing and transmitting computer screen imagesFunctions of the Capture window Close button Selecting the capturing methodFull Screen capture Area capture$ Right-click the icon on the taskbar, and select Capture Click Capture Start Select the window to be captured. Note Active Window captureSetting the capturing conditions Functions in the Image List window Transmitting existing imagesBasic operations $ Interval Using Auto Play to play images in a specified orderImage List status settings # Number of LoopsShortcut Key Assignment Other useful Wireless Manager functionsEncryption settings What Jpeg Convertor can do Using Jpeg ConvertorMain screen functions Starting Jpeg ConvertorMaximize button + Picture quality sliderSave to SD Memory Card button Minimize buttonQuality Images which cannot be imported Importing files using drag-and-dropDouble click on the image you wish to check Checking, sorting and deleting imagesChecking images Sorting imagesDeleting images Conversion settings for saving imagesPicture quality slider Saving to other foldersSave as different size check box Converted size list boxFile format DCF standardLimits on directory names File namesMessage List Using the Serial connectorBefore asking for service Symptom Check the followingSymptom Check the following Symptom Check the following PAL-N / Secam SpecificationsSync Options Wireless cardTrademark Information DimensionsMade in Japan S0801-2081C
Top Page Image Contents