Panasonic PT-L712NTE manual Lan

Page 16

(3) When using an existing access point for wireless communication

Use the access point to carry out wireless communication between the computer and the projector in Infrastructure mode. Some access points may not let you make connections.

Computer Computer Computer

LAN

ComputerAccess pointProjector

Setting procedure

Set the computer and the projector according to the following procedure.

Preparation &			Checkcommunication			Transmit
settings						images
<Projector>			<Computer>			<Computer>
Inserting the			Use Wireless			Use Wireless
wireless card (page			Manager to check			Manager to
wireless card (page			Manager to check			Manager to
18)			communication with			transmit the
LAN settings (page			the projector (page			images (page
21)			40)			41)

Setting example

Setting item	Projector LAN settings
IP ADDRESS	Ask your network administrator for details on
SUBNET MASK	settings.
MODE	INFRASTRUCURE
CHANNEL	Set to the same CHANNEL as the CHANNEL for the
	access point. (Ask your network administrator for
	details.)
SSID	Set to the same SSID as the SSID for the access
	point. (Ask your network administrator for details.)

Note:

•If either the projector or computer is out of the range of the access point, use Ad Hoc mode as described in page 14.

-16-

Image 16

Contents Operating Instructions LCD Projector Commercial UseContents Dear Panasonic Customer Safety PrecautionsDo not insert any foreign objects into the card slot Radio frequencies used by the wireless card Do not use the cards near other sources of radio emissionsAvailable channels EtsiCheck accessories Wireless card slotWireless card Names of each partWireless image transfer system for the projector System diagramTransferable images Main functions of the application software Software FunctionsExplanation of terms IP AddressSubnet Mask GatewayAd Hoc Mode Infrastructure ModeAccess Point ChannelJpeg PowerPoint ExifWireless function preparation Firstly, when using the wireless functionSetting procedure Setting exampleComputerProjectorComputer LAN Page Installing and removing the wireless card Inserting the wireless card# Turn off the power supply for the projector Close the slot cover$ Open the slot cover Press the eject switch Removing the wireless cardPush in the eject switch and then remove the wireless card On-screen menus List of menu screensProjector LAN settings LAN SetupLock Setup $ Mode ChannelSsid Subnet Mask KEY Installing and removing the computer’s wireless card Setting up the computer wireless cardInstalling the wireless card Removing the wireless card Installing the driverFor Windows Click OK without changing any of the detailed settings Click FinishClick Yes. The computer will then re-start Checking the protocol Click YesPage Click OK + Click Yes. The computer will then Re-start Page Installing the Configuration Utility Click CloseUsing the Wireless Manager Wireless Manager capabilitiesStarting and closing the Wireless Manager Displaying the Configuration UtilityComputer network settings Make the following settings # Select Setting $ Setting NameCreate DeleteWireless LAN ModeChecking communication with the projector Basic image transmission examples Example 2 Projecting already-existing imagesCapturing and transmitting computer screen images Before transmitting imagesFunctions of the Capture window Selecting the capturing method Close buttonArea capture Full Screen capture$ Right-click the icon on the taskbar, and select Capture Active Window capture Click Capture Start Select the window to be captured. NoteSetting the capturing conditions Transmitting existing images Functions in the Image List windowBasic operations Using Auto Play to play images in a specified order Image List status settings# Number of Loops $ IntervalOther useful Wireless Manager functions Shortcut Key AssignmentEncryption settings Using Jpeg Convertor What Jpeg Convertor can doStarting Jpeg Convertor Main screen functions+ Picture quality slider Save to SD Memory Card buttonMinimize button Maximize buttonQuality Importing files using drag-and-drop Images which cannot be importedChecking, sorting and deleting images Checking imagesSorting images Double click on the image you wish to checkConversion settings for saving images Deleting imagesSaving to other folders Save as different size check boxConverted size list box Picture quality sliderDCF standard Limits on directory namesFile names File formatUsing the Serial connector Before asking for serviceSymptom Check the following Message ListSymptom Check the following Symptom Check the following Specifications PAL-N / SecamSync Wireless card OptionsDimensions Trademark InformationMade in Japan S0801-2081C