Panasonic PT-L712NTE manual Setting the capturing conditions

Page 46

Setting the capturing conditions

The Setting Capture window contains various options which affect how images are captured. Right-click the icon on the taskbar, and select “Option”. Then select “SETTING CAPTURE” from the “Option” window.

#Capture Format

Lets you select the format for saving the captured images in. You can select either PNG, BMP or JPEG.

$ Option

When “Capture Format” is set to “JPEG”, this lets you specify the JPEG compression ratio. If the slide

bar is moved towards “High”, the image quality becomes higher, but the resulting image file size is larger. If the slide bar is moved towards “Low”, the image quality becomes poorer but the resulting image file size is smaller.

%After Capture

If you would like images to be sent to the projector as soon as they are captured, select “Send Projector”.

If you would like to save the captured images to a location such as the computer’s hard disk, select “Save Picture”. Furthermore, click the button and specify the location to save the image. You can select the same location that was used to save the previous image by clicking the

G button.

&Preview & History

If this is selected, you can view the captured image preview and the history for the captured images in the Capture window.

( Still Timer For Capture

Depending on the computer's processing speed, the image may be captured while it is still being redrawn on the computer screen. When doing a full screen capture, click “CAPTURE START” in the “Capture” window. When capturing the active window, select the window to be captured. After this, select the “Still Timer for Capture” box if you would like to set an interval of time before capturing actually starts. You can then set the time to between 1 and 30 seconds in the box below.

-46-

Image 46

Contents Operating Instructions LCD Projector Commercial UseContents Dear Panasonic Customer Safety PrecautionsDo not insert any foreign objects into the card slot Radio frequencies used by the wireless card Do not use the cards near other sources of radio emissionsAvailable channels EtsiWireless card Check accessoriesWireless card slot Names of each partWireless image transfer system for the projector System diagramTransferable images Main functions of the application software Software FunctionsSubnet Mask Explanation of termsIP Address GatewayAccess Point Ad Hoc ModeInfrastructure Mode ChannelJpeg PowerPoint ExifSetting procedure Wireless function preparationFirstly, when using the wireless function Setting exampleComputerProjectorComputer LAN Page # Turn off the power supply for the projector Installing and removing the wireless cardInserting the wireless card Close the slot cover$ Open the slot cover Press the eject switch Removing the wireless cardPush in the eject switch and then remove the wireless card On-screen menus List of menu screensProjector LAN settings LAN SetupLock Setup $ Mode ChannelSsid Subnet Mask KEY Installing and removing the computer’s wireless card Setting up the computer wireless cardInstalling the wireless card Removing the wireless card Installing the driverFor Windows Click OK without changing any of the detailed settings Click FinishClick Yes. The computer will then re-start Checking the protocol Click YesPage Click OK + Click Yes. The computer will then Re-start Page Installing the Configuration Utility Click CloseStarting and closing the Wireless Manager Using the Wireless ManagerWireless Manager capabilities Displaying the Configuration UtilityComputer network settings Create Make the following settings # Select Setting$ Setting Name DeleteWireless LAN ModeChecking communication with the projector Basic image transmission examples Example 2 Projecting already-existing imagesCapturing and transmitting computer screen images Before transmitting imagesFunctions of the Capture window Selecting the capturing method Close buttonArea capture Full Screen capture$ Right-click the icon on the taskbar, and select Capture Active Window capture Click Capture Start Select the window to be captured. NoteSetting the capturing conditions Transmitting existing images Functions in the Image List windowBasic operations # Number of Loops Using Auto Play to play images in a specified orderImage List status settings $ IntervalOther useful Wireless Manager functions Shortcut Key AssignmentEncryption settings Using Jpeg Convertor What Jpeg Convertor can doStarting Jpeg Convertor Main screen functionsMinimize button + Picture quality sliderSave to SD Memory Card button Maximize buttonQuality Importing files using drag-and-drop Images which cannot be importedSorting images Checking, sorting and deleting imagesChecking images Double click on the image you wish to checkConversion settings for saving images Deleting imagesConverted size list box Saving to other foldersSave as different size check box Picture quality sliderFile names DCF standardLimits on directory names File formatSymptom Check the following Using the Serial connectorBefore asking for service Message ListSymptom Check the following Symptom Check the following Specifications PAL-N / SecamSync Wireless card OptionsDimensions Trademark InformationMade in Japan S0801-2081C