Panasonic PT-L712NTE manual DCF standard, Limits on directory names, File names, File format

Page 60

DCF standard

The DCF specification imposes the following conditions.

Limits on directory names

Directories must be created within the main DCIM directory.

•Data which is contained within any directory other than the DCIM directory cannot be recognised.

Directory names must consist of three numerals (directory number) followed by five alphanumeric characters. (Example: 100abcde)

•The three numerals must make up a number between 100 and 999, and the alphanumeric characters can be taken from the following set of 37 characters: 0123456789abcdefghijklmnopqrstuvwxyz_ (No distinction is made between upper-case and lower-case alphabetic characters. Double-byte characters cannot be used.)

Multiple directories using the same three-digit combination (directory number) cannot be created.

Directory sub-hierarchies are not supported.

File names

File names must consist of four alphanumeric characters followed by four numerals (file number), followed by “.jpg”. (Example: abcd0001.jpg)

•The four numerals must make up a number between 0001 and 9999, and the alphanumeric characters can be taken from the following set of 37 characters: 0123456789abcdefghijklmnopqrstuvwxyz_ (No distinction is made between upper-case and lower-case alphabetic characters. Double-byte characters cannot be used.)

Multiple file names using the same four-digit combination (file number) cannot be created.

File format

Only JPEG image files which comply with the Exif 2.1 standard are recognised.

-60-

Image 60

Contents Operating Instructions LCD Projector Commercial UseContents Safety Precautions Dear Panasonic CustomerDo not insert any foreign objects into the card slot Radio frequencies used by the wireless card Do not use the cards near other sources of radio emissionsAvailable channels EtsiCheck accessories Wireless card slotWireless card Names of each partWireless image transfer system for the projector System diagramTransferable images Main functions of the application software Software FunctionsExplanation of terms IP AddressSubnet Mask GatewayAd Hoc Mode Infrastructure ModeAccess Point ChannelJpeg PowerPoint ExifWireless function preparation Firstly, when using the wireless functionSetting procedure Setting exampleComputerProjectorComputer LAN Page Installing and removing the wireless card Inserting the wireless card# Turn off the power supply for the projector Close the slot coverRemoving the wireless card $ Open the slot cover Press the eject switchPush in the eject switch and then remove the wireless card On-screen menus List of menu screensProjector LAN settings LAN SetupLock Setup $ Mode ChannelSsid Subnet Mask KEY Setting up the computer wireless card Installing and removing the computer’s wireless cardInstalling the wireless card Installing the driver Removing the wireless cardFor Windows Click OK without changing any of the detailed settings Click FinishClick Yes. The computer will then re-start Checking the protocol Click YesPage Click OK + Click Yes. The computer will then Re-start Page Installing the Configuration Utility Click CloseUsing the Wireless Manager Wireless Manager capabilitiesStarting and closing the Wireless Manager Displaying the Configuration UtilityComputer network settings Make the following settings # Select Setting $ Setting NameCreate DeleteWireless LAN ModeChecking communication with the projector Basic image transmission examples Example 2 Projecting already-existing imagesBefore transmitting images Capturing and transmitting computer screen imagesFunctions of the Capture window Selecting the capturing method Close buttonFull Screen capture Area capture$ Right-click the icon on the taskbar, and select Capture Active Window capture Click Capture Start Select the window to be captured. NoteSetting the capturing conditions Transmitting existing images Functions in the Image List windowBasic operations Using Auto Play to play images in a specified order Image List status settings# Number of Loops $ IntervalOther useful Wireless Manager functions Shortcut Key AssignmentEncryption settings Using Jpeg Convertor What Jpeg Convertor can doStarting Jpeg Convertor Main screen functions+ Picture quality slider Save to SD Memory Card buttonMinimize button Maximize buttonQuality Importing files using drag-and-drop Images which cannot be importedChecking, sorting and deleting images Checking imagesSorting images Double click on the image you wish to checkConversion settings for saving images Deleting imagesSaving to other folders Save as different size check boxConverted size list box Picture quality sliderDCF standard Limits on directory namesFile names File formatUsing the Serial connector Before asking for serviceSymptom Check the following Message ListSymptom Check the following Symptom Check the following Specifications PAL-N / SecamSync Wireless card OptionsDimensions Trademark InformationMade in Japan S0801-2081C