Outlaw Audio Model 970 Remote Control, These buttons control the Model 970’s volume

Page 10

Owner’s Manual

Remote Control

Model 970 Remote Control

Remote Control

RC

1

RC

2

RC

3

RC

4

RC

5

RC

6

RC

7

RC

8

RC

9

RC

10

RC

11

RC

12

RC

13

RC

14

RC

15

RC

16

RC

17

RC

18

RC

19

RC

20

RC

21

RC

22

RC

23

RC

24

RC

25

RC

26

RC

27

RC

28

The Model 970’s hand held remote controller is a pre-programmed universal unit that contains an extensive library of IR codes and can control up to seven other system components in addition to duplicating every one of the Model 970’s front panel functions. All of these choices are shown on the Model 970’s front panel and on-screen displays.

Activate the remote’s backlight by simply touching any pushbutton. This lets you use the remote comfortably even in a dark room. The backlight stays on for 5 seconds after you’ve touched a pushbutton.

RC1 Setup button (see pages 40-42)

Holding down this button for three seconds causes the remote to enter setup mode. In this mode, you can enter an entire set of codes for another device to be controlled.

RC2 Device Control Selector buttons (see pages 24, 36, 40-42)

Selects the component you want to control with the remote. Push TNR

to control the Model 970.

RC3 Numeric keypad (see pages 38-42)

Buttons for control functions requiring you to enter numbers, such as command code selection when programming the remote, using the tuner, selecting CD and DVD player tracks, etc.

RC4 Mute button (see page 36)

Mutes the Model 970’s output. Pushing the button again restores the volume to its previous level. Changing the front panel or remote control volume setting also releases the mute function. Mute status is shown on the front panel display.

RC5 Volume Up/Down buttons (see pages 36, 40-42)

These buttons control the Model 970’s volume.

RC6 Sleep button (see page 37)

Activates the sleep timer, putting the processor into Standby mode after a certain period. The first push sets the timer at 90 minutes; subsequent pushes scroll though 75, 60, 45, 30, 20, 10, 5 minutes, and Off. Once the timer is set, pushing this button again displays the remaining time on both the front panel and the on-screen display.

RC7 Guide/Test dual function button (see page 37)

Model 970: Test turns on the test tone generator to set speaker levels. To route the test tone from one speaker to the next, press the Left or Right Cursor buttons. Use the Up/Down cursor buttons to adjust levels. Press Set when finished.

Other components: Guide calls up the program guide on satellite receiv- ers and cable boxes.

RC8 Cursor control buttons (menu navigation)

In general, the Up and Down cursor buttons select a particular function or parameter from the on-screen menu while the Left and Right cursor buttons adjust whatever function or parameter that’s been selected. Set activates selections made while using the on-screen menu.

RC9 Direct/ dual function button (see page 38)

Model 970: Direct enables access to a radio station directly. Press once, then enter the station’s frequency using the numeric keys.

Other components: begins the play function.

10

Outlaw Audio

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Model When the power-supply cord or plug is damaged Please Read FirstWiring Power CordHandle the AC Power Cord Gently Installation LocationTable of Contents Outlaw Audio Model Brief Note On This ManualUnpacking AccessoriesActivates or cancels the on-screen menu Model 970 Front PanelSelects between AM or FM Adjusts the volume level of the headphonesModel 970 Front Panel Selects between FM mono and FM stereoModel 970 Rear Panel Model 970 Rear Panel RP24 AC input seeThese buttons control the Model 970’s volume Remote ControlModel 970 Remote Control Other components begins the play functionOther components activates the recording function Other components temporarily stops Play or RecordAvailable Surround Modes Surround FormatsModel 970 Front Panel and On Screen Display Dolby Digital EX Dolby DigitalDolby Pro Logic Connecting Your Model Stereo Listening ModesConnection Record Chart Connecting Audio Components see Connecting Video Components see pagesDigital TV Tuner/Cable Box/Satellite Receiver Video RecorderVideo Display Connections Amplifier Connections see AC power connectionAntenna Connections Subwoofer Connection seeConnecting Audio Equipment to the Model Audio Recording DeviceConnecting a DVD Player to the Model DVD-Audio/SACD/DVD PlayerConnecting Other Video Components to the Model Audio Connection NoteConnecting a Video Display to the Model If the video display has an Hdmi inputConnecting an External Amplifier to the Model When using a passiveExit Takes you out of Menu mode System SetupInput Configuration Here’s a brief explanation of each item on the Main menuDVD Configuration sub-menu will appear Input Configuration sub-menu appearsInput choices appear as follows as you scroll through them Configuring Audio Inputs Speaker PlacementUp to 200ms of delay can be selected in 10ms increments There is no Lip Sync Delay available for audio-only sourcesLeft and Right Surround Speakers Speaker PlacementLeft Front, Center, and Right Front Speakers Surround Back Left and Right SpeakersSubwoofers Speaker Size ConfigurationTo enter settings for speaker size Speaker Size sub-menu appearsTo enter settings for speaker crossover Speaker X-Over Crossover ConfigurationSelect LB/RB when you have two Surround Back speakers Speaker X-Over sub-menu appearsNight Mode Surround Setting ConfigurationsSurround Configuration sub-menu appears PanoramaChannel Calibration DimensionHP Headphone Mode Channel Subwoofer OffsetAs you desire Channel Calibration sub-menu appearsChannel Calibration with the Model 970 Test Tone Manual Channel Calibration with Your Own Test SourceDelay Settings for Large Rooms Delay AdjustTo set the Delay for each channel You can adjust the level from -70 to +10dB System Configuration SettingsAvailable choices are Model 970 Operation PowerStandby/On indicator on the front panel will glow amber Direct OperationVolume of the selected source will return at the new level Use this control to adjust the volume levelName of the selected source will reappear in the displays Sleep Timer Night Mode SelectionNo Comp means no compression i.e., Night Mode Off Channel TrimAdjusting Tone Controls Using the AM/FM TunerLip-Synch Delay Stereo will tune stereo signalsTo create FM station-memory presets automatically Using HeadphonesCreating an AM or FM station-memory preset manually To select a preset stationSetup Using Preprogrammed Codes Remote Control Setup and OperationBattery Installation To install batteries in the remote controlLED will blink twice Volume Control Punch-ThroughYou can choose CBL, AUX, VCR, TV, SAT, CD, or AMP Cleaning Care and MaintenanceSystem Reset When You Are AwaySetup Codes TroubIeshootingDVD Players TV/VCR Combos VCRs Model 970 Specifications Outlaw Audio Limited Warranty T l a w a u d i o

970 specifications

Outlaw Audio's Model 970 is a high-performing preamp processor designed to meet the growing demands of home theater enthusiasts and audiophiles alike. With a focus on delivering an exceptional audio experience, the 970 integrates advanced features, cutting-edge technologies, and a user-friendly interface.

One of the standout features of the Outlaw 970 is its support for high-resolution audio formats. This preamp processor is equipped to handle various formats, including Dolby TrueHD and DTS-HD Master Audio, which ensures that soundtracks are reproduced with stunning clarity and detail. The device supports both multichannel audio and two-channel stereo, making it versatile for different listening environments.

Equipped with 7.1-channel processing, the Outlaw 970 provides an immersive sound experience that gives users the feeling of being right in the middle of the action. Additionally, it features a robust set of audio controls that allow users to tailor their auditory experience. The processor includes adjustable bass management, enabling seamless integration with various subwoofers, and multiple listening modes to suit various content, from music to movies.

In terms of connectivity, the 970 does not disappoint. It offers an array of inputs and outputs, ensuring compatibility with modern audio and video components. It features multiple HDMI inputs, coaxial and optical digital inputs, as well as analog audio inputs, providing flexibility for connecting different devices. An essential highlight is its acclaimed video processing, which ensures that users can enjoy high-quality video playback, supporting resolutions up to 4K.

The Outlaw 970 also incorporates advanced technologies such as room correction software designed to optimize audio performance based on the acoustics of your listening space. This calibration feature significantly enhances the clarity and coherence of sound, making it ideal for those looking to achieve audio perfection within their home theater setups.

With a user-friendly interface, the Outlaw 970 allows for easy navigation and configuration. The device comes with an intuitive remote control that provides quick access to essential functions, while its front panel offers a straightforward layout for manual adjustments.

In conclusion, the Outlaw Audio Model 970 stands as a premium choice for those seeking a preamp processor that combines high-performance audio processing, robust connectivity, and intelligent calibration technologies. Its dedication to quality audio reproduction and user adaptability makes it a valuable addition to any home theater system.
Top Page Image Contents