Outlaw Audio 970 Input Configuration sub-menu appears, DVD Configuration sub-menu will appear

Page 25

3.With the cursor pointing to INPUT CONFIG, press SET on the front panel or the remote.

The Input Configuration sub-menu appears:

input

config

> dvd

CONFIG

video 1

CONFIG

video 2

CONFIG

video 3

CONFIG

video 4

CONFIG

TUNER

CONFIG

CD

CONFIG

TAPE

CONFIG

AUX

CONFIG

return to main menu

There are 5 video inputs to configure: DVD and Videos 1-4. Configuration of most of the inputs follow the same steps. For the following example we'll use the DVD Input. To select a different input to configure, use the Up and Down cursor buttons. Once you’ve selected an input to configure, press Set.

4.With the cursor pointing to DVD CONFIG, press SET on the front panel or the remote.

The DVD Configuration sub-menu will appear:

> AUDIO

DVD

config

:ANALOG

video

:AUTO

OSD

:ON

 

SURR:DOLBY PLIIx-C

LEVEL TRIM

: 0dB

AUTO POLL

:on

BASS

 

: 0dB

TREBLE

 

: 0dB

LIP SYNC DELAY: 0ms return to input menu

The following steps will guide you through the process of choosing the correct settings for your video input devices.

Setting the Audio

To configure the Audio of a video input:

1.Move the cursor to Audio by using the and buttons on the front panel or remote.

2.Press the and buttons on the front panel or remote to scroll through the available audio input choices.

The input choices appear as follows as you scroll through them:

analogext 7.1optical 1optical 2optical 3optical 4Coaxial 1coaxial 2Coaxial 3Coaxial 4

Select the one that matches the connections you have made to the input being adjusted.

NOTE: Even if you choose a digital input, you will not be able to see all the surround format choices available UNLESS that input is receiv- ing a digital audio signal from your source.

Owner’s Manual

System Setup

Setting the Video

To configure the Video of a video input:

1.Move the cursor to video by using the and buttons on the front panel or remote.

2.Press the and buttons on the front panel or remote to scroll through the available video input choices.

The input choices appear as follows as you scroll through them:

autocomponents videocomposite

Select the one that matches the connections you have made to the input being adjusted.

Auto samples analog video inputs and selects the best available signal.

If you are using a DVI connection from your DVD player, the Model 970 will default to DVI 1 when it detects a signal at that input. Note that the DVI 1 input is available only when you select DVD. It is “hard-wired” to that input, but is available only when a signal activates it.

The DVI 2 input is “hard-wired” to the Video 2 input. If you have a second DVI (HDMI) source, you should make the configuration adjustments for the device connected to DVI 2 in the Video 2 input.

Setting the OSD (On-screen display)

To configure the appearance of the OSD when a video input is selected:

1.Move the cursor to osd by using the and buttons on the front panel or remote.

2.Press the and buttons on the front panel or remote to toggle between ON and OFF.

If you select ON, messages will appear at the bottom of your video display when you make an adjustment to the Model 970, such as a volume change or other parameter adjustment, using the remote or front panel.

If you select OFF, these on-screen messages, will not appear.

Note: When you switch to another input, the OSD choice you’ve made for that input will take priority.

Setting the Surround Format

To configure the Surround Format of a video input:

1.Move the cursor to surr by using the and buttons on the front panel or remote.

2.Press the and buttons on the front panel or remote to scroll through the preferred surround format for this input.

If you are using an analog input, or a digital input receiving a 2-channel signal, or if the video source is stopped or turned off, the choices appear as follows as you scroll through them:

PLIIx-cPLIIx-mpliix-xpro logicDolby plii-cDolby plii-mdolby plii-xneo-6 cinemaNEO-6 MUSIC7 STEREO5 STEREOSTEREO

NOTE: Your choices will differ depending on the number of speakers you are using and whether you’ve selected a digital or analog audio input. For example, you will not see “7 stereo” for a 5.1 system. You will not see any all-digital formats if you’ve selected an analog input.

Model 970 7.1 Channel Preamplifier Processor

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Model Please Read First When the power-supply cord or plug is damagedHandle the AC Power Cord Gently Power CordWiring Installation LocationTable of Contents Brief Note On This Manual Outlaw Audio ModelActivates or cancels the on-screen menu AccessoriesUnpacking Model 970 Front PanelModel 970 Front Panel Adjusts the volume level of the headphonesSelects between AM or FM Selects between FM mono and FM stereoModel 970 Rear Panel RP24 AC input see Model 970 Rear PanelModel 970 Remote Control Remote ControlThese buttons control the Model 970’s volume Other components begins the play functionOther components temporarily stops Play or Record Other components activates the recording functionAvailable Surround Modes Surround FormatsModel 970 Front Panel and On Screen Display Dolby Digital EX Dolby DigitalDolby Pro Logic Stereo Listening Modes Connecting Your ModelConnection Record Chart Connecting Video Components see pages Connecting Audio Components seeDigital TV Tuner/Cable Box/Satellite Receiver Video RecorderVideo Display Connections Antenna Connections AC power connectionAmplifier Connections see Subwoofer Connection seeAudio Recording Device Connecting Audio Equipment to the ModelDVD-Audio/SACD/DVD Player Connecting a DVD Player to the ModelAudio Connection Note Connecting Other Video Components to the ModelIf the video display has an Hdmi input Connecting a Video Display to the ModelWhen using a passive Connecting an External Amplifier to the ModelInput Configuration System SetupExit Takes you out of Menu mode Here’s a brief explanation of each item on the Main menuDVD Configuration sub-menu will appear Input Configuration sub-menu appearsInput choices appear as follows as you scroll through them Up to 200ms of delay can be selected in 10ms increments Speaker PlacementConfiguring Audio Inputs There is no Lip Sync Delay available for audio-only sourcesLeft Front, Center, and Right Front Speakers Speaker PlacementLeft and Right Surround Speakers Surround Back Left and Right SpeakersTo enter settings for speaker size Speaker Size ConfigurationSubwoofers Speaker Size sub-menu appearsSelect LB/RB when you have two Surround Back speakers Speaker X-Over Crossover ConfigurationTo enter settings for speaker crossover Speaker X-Over sub-menu appearsSurround Configuration sub-menu appears Surround Setting ConfigurationsNight Mode PanoramaHP Headphone Mode DimensionChannel Calibration Channel Subwoofer OffsetChannel Calibration with the Model 970 Test Tone Channel Calibration sub-menu appearsAs you desire Manual Channel Calibration with Your Own Test SourceDelay Settings for Large Rooms Delay AdjustTo set the Delay for each channel You can adjust the level from -70 to +10dB System Configuration SettingsAvailable choices are Standby/On indicator on the front panel will glow amber PowerModel 970 Operation Direct OperationVolume of the selected source will return at the new level Use this control to adjust the volume levelName of the selected source will reappear in the displays No Comp means no compression i.e., Night Mode Off Night Mode SelectionSleep Timer Channel TrimLip-Synch Delay Using the AM/FM TunerAdjusting Tone Controls Stereo will tune stereo signalsCreating an AM or FM station-memory preset manually Using HeadphonesTo create FM station-memory presets automatically To select a preset stationBattery Installation Remote Control Setup and OperationSetup Using Preprogrammed Codes To install batteries in the remote controlLED will blink twice Volume Control Punch-ThroughYou can choose CBL, AUX, VCR, TV, SAT, CD, or AMP System Reset Care and MaintenanceCleaning When You Are AwayTroubIeshooting Setup CodesDVD Players TV/VCR Combos VCRs Model 970 Specifications T l a w a u d i o Outlaw Audio Limited Warranty

970 specifications

Outlaw Audio's Model 970 is a high-performing preamp processor designed to meet the growing demands of home theater enthusiasts and audiophiles alike. With a focus on delivering an exceptional audio experience, the 970 integrates advanced features, cutting-edge technologies, and a user-friendly interface.

One of the standout features of the Outlaw 970 is its support for high-resolution audio formats. This preamp processor is equipped to handle various formats, including Dolby TrueHD and DTS-HD Master Audio, which ensures that soundtracks are reproduced with stunning clarity and detail. The device supports both multichannel audio and two-channel stereo, making it versatile for different listening environments.

Equipped with 7.1-channel processing, the Outlaw 970 provides an immersive sound experience that gives users the feeling of being right in the middle of the action. Additionally, it features a robust set of audio controls that allow users to tailor their auditory experience. The processor includes adjustable bass management, enabling seamless integration with various subwoofers, and multiple listening modes to suit various content, from music to movies.

In terms of connectivity, the 970 does not disappoint. It offers an array of inputs and outputs, ensuring compatibility with modern audio and video components. It features multiple HDMI inputs, coaxial and optical digital inputs, as well as analog audio inputs, providing flexibility for connecting different devices. An essential highlight is its acclaimed video processing, which ensures that users can enjoy high-quality video playback, supporting resolutions up to 4K.

The Outlaw 970 also incorporates advanced technologies such as room correction software designed to optimize audio performance based on the acoustics of your listening space. This calibration feature significantly enhances the clarity and coherence of sound, making it ideal for those looking to achieve audio perfection within their home theater setups.

With a user-friendly interface, the Outlaw 970 allows for easy navigation and configuration. The device comes with an intuitive remote control that provides quick access to essential functions, while its front panel offers a straightforward layout for manual adjustments.

In conclusion, the Outlaw Audio Model 970 stands as a premium choice for those seeking a preamp processor that combines high-performance audio processing, robust connectivity, and intelligent calibration technologies. Its dedication to quality audio reproduction and user adaptability makes it a valuable addition to any home theater system.
Top Page Image Contents