Outlaw Audio 970 Speaker Placement, Up to 200ms of delay can be selected in 10ms increments

Page 26

Owner’s Manual

System Setup

Setting the Level Trim:

To configure the Level Trim of a video input:

1.Move the cursor to level trim by using the and buttons on the front panel or remote.

2.Press the and buttons on the front panel or remote to scroll through the preferred level trim for this input.

The input choices appear as follows as you scroll through them:

0dB-6db-12db

These choices allow you to adjust relative audio levels so that when you switch from one source to another, you won’t be subjected to a wide disparity in volume. We suggest that you accept the “0dB” default for each input and make changes only after you determine that an input needs “trimming.”

Setting Auto Polling

To configure the Auto Polling of a video input:

1.Move the cursor to auto poll by using the and buttons on the front panel or remote.

2.Press the and buttons on the front panel or remote to toggle between ON and OFF.

When ON is selected the Auto Poll circuitry will automatically switch the audio input from the selected digital source to the analog input for the source when the digital data stream is interrupted. This is helpful for use with digital cable boxes where the audio switches between digital and analog, depending on which channel is selected.

When OFF is selected the Model 970 will keep the digital input active even when the digital data is interrupted. This is the preferred setting for the DVD input where the digital audio stops during menu setup or when a disc is paused.

Setting Bass and Treble

You’ll make both these tone control adjustments in the same way.

To configure the Bass or Treble of a video input:

1.Move the cursor to bass (or TREBLE) by using the and buttons on the front panel or remote.

2.Press the and buttons on the front panel or remote to scroll through the preferred tone control settings for this input.

The input choices for both Bass and Treble appear as follows as you scroll through them:

-6db-5db-4db-3db-2db-1db0dB1db2db3db4db5db6db

Setting Lip Sync Delay

Digital video sources and displays will often use extensive video processing for scaling or in transmission paths that may cause the video on your screen to lag behind the audio. The amount of this delay will vary with a number of factors, but the Model 970 lets you delay the audio to fix this problem. It also lets you set a different lip sync delay time for each input.

To configure the Lip Sync Delay of a video input:

1.Move the cursor to lip sync delay by using the and buttons on the front panel or remote.

2.Press to increase the amount of lip sync delay, or to decrease it.

Up to 200ms of delay can be selected in 10ms increments.

Choosing Another Input

To select another input from the Input Configuration sub-menu:

1.Move the cursor to return to input menu by using the and buttons on the front panel or remote.

2.Press SET on the front panel or the remote.

The Input Configuration sub-menu appears.

3.Move the cursor to the new input that you want to configure by using the and buttons on the front panel or remote.

4.Press SET on the front panel or the remote.

You’ll see the same configuration sub-menu as you did for the DVD input. You’ll configure the remaining video inputs (Video 1-4) by following the same procedures. Remember that the DVI 2 connector is available only when you’ve selected the Video 2 input.

Configuring Audio Inputs

In general, the procedures for configuring Audio inputs (Tuner, CD, Tape, and Aux) are very similar to those for configuring Video inputs. Two major differences are:

nYou can’t choose a video input for any of the four audio sources (the menu line is there but the only choice is “None”)

nThere is no Lip Sync Delay available for audio-only sources

Proceed with configuring the tuner and remaining audio components con- nected to your Model 970. Once you have completed the input configuration process for all inputs, your next step is to configure the Model 970 to match the number and type of speakers in your system.

To return to the Main Menu:

1.Move the cursor to return to MAIN menu by using the and buttons on the front panel or remote.

2.Press SET on the front panel or the remote.

The Main Menu appears.

Speaker Placement

Before we get to the Speaker Size sub-menu, it is worth mentioning that you should understand that correct speaker placement is critical to good sound. Then again, also understand that there are no hard and fast laws governing where you should put them!

Frustrating, right? The good news is that there are several guidelines you can follow. Unfortunately, every listening room and combination of speak- ers exhibits different acoustic qualities, so what works in one situation won’t necessarily work in another. So, you’ll probably have to experiment a bit before you’re really happy with your system’s sound. That being said, here are some pointers to follow.

26

Outlaw Audio

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Model When the power-supply cord or plug is damaged Please Read FirstWiring Power CordHandle the AC Power Cord Gently Installation LocationTable of Contents Outlaw Audio Model Brief Note On This ManualUnpacking AccessoriesActivates or cancels the on-screen menu Model 970 Front PanelSelects between AM or FM Adjusts the volume level of the headphonesModel 970 Front Panel Selects between FM mono and FM stereoModel 970 Rear Panel Model 970 Rear Panel RP24 AC input seeThese buttons control the Model 970’s volume Remote ControlModel 970 Remote Control Other components begins the play functionOther components activates the recording function Other components temporarily stops Play or RecordModel 970 Front Panel and On Screen Display Surround FormatsAvailable Surround Modes Dolby Pro Logic Dolby DigitalDolby Digital EX Connecting Your Model Stereo Listening ModesConnection Record Chart Connecting Audio Components see Connecting Video Components see pagesVideo Display Connections Video RecorderDigital TV Tuner/Cable Box/Satellite Receiver Amplifier Connections see AC power connectionAntenna Connections Subwoofer Connection seeConnecting Audio Equipment to the Model Audio Recording DeviceConnecting a DVD Player to the Model DVD-Audio/SACD/DVD PlayerConnecting Other Video Components to the Model Audio Connection NoteConnecting a Video Display to the Model If the video display has an Hdmi inputConnecting an External Amplifier to the Model When using a passiveExit Takes you out of Menu mode System SetupInput Configuration Here’s a brief explanation of each item on the Main menuInput choices appear as follows as you scroll through them Input Configuration sub-menu appearsDVD Configuration sub-menu will appear Configuring Audio Inputs Speaker PlacementUp to 200ms of delay can be selected in 10ms increments There is no Lip Sync Delay available for audio-only sourcesLeft and Right Surround Speakers Speaker PlacementLeft Front, Center, and Right Front Speakers Surround Back Left and Right SpeakersSubwoofers Speaker Size ConfigurationTo enter settings for speaker size Speaker Size sub-menu appearsTo enter settings for speaker crossover Speaker X-Over Crossover ConfigurationSelect LB/RB when you have two Surround Back speakers Speaker X-Over sub-menu appearsNight Mode Surround Setting ConfigurationsSurround Configuration sub-menu appears PanoramaChannel Calibration DimensionHP Headphone Mode Channel Subwoofer OffsetAs you desire Channel Calibration sub-menu appearsChannel Calibration with the Model 970 Test Tone Manual Channel Calibration with Your Own Test SourceTo set the Delay for each channel Delay AdjustDelay Settings for Large Rooms Available choices are System Configuration SettingsYou can adjust the level from -70 to +10dB Model 970 Operation PowerStandby/On indicator on the front panel will glow amber Direct OperationName of the selected source will reappear in the displays Use this control to adjust the volume levelVolume of the selected source will return at the new level Sleep Timer Night Mode SelectionNo Comp means no compression i.e., Night Mode Off Channel TrimAdjusting Tone Controls Using the AM/FM TunerLip-Synch Delay Stereo will tune stereo signalsTo create FM station-memory presets automatically Using HeadphonesCreating an AM or FM station-memory preset manually To select a preset stationSetup Using Preprogrammed Codes Remote Control Setup and OperationBattery Installation To install batteries in the remote controlYou can choose CBL, AUX, VCR, TV, SAT, CD, or AMP Volume Control Punch-ThroughLED will blink twice Cleaning Care and MaintenanceSystem Reset When You Are AwaySetup Codes TroubIeshootingDVD Players TV/VCR Combos VCRs Model 970 Specifications Outlaw Audio Limited Warranty T l a w a u d i o

970 specifications

Outlaw Audio's Model 970 is a high-performing preamp processor designed to meet the growing demands of home theater enthusiasts and audiophiles alike. With a focus on delivering an exceptional audio experience, the 970 integrates advanced features, cutting-edge technologies, and a user-friendly interface.

One of the standout features of the Outlaw 970 is its support for high-resolution audio formats. This preamp processor is equipped to handle various formats, including Dolby TrueHD and DTS-HD Master Audio, which ensures that soundtracks are reproduced with stunning clarity and detail. The device supports both multichannel audio and two-channel stereo, making it versatile for different listening environments.

Equipped with 7.1-channel processing, the Outlaw 970 provides an immersive sound experience that gives users the feeling of being right in the middle of the action. Additionally, it features a robust set of audio controls that allow users to tailor their auditory experience. The processor includes adjustable bass management, enabling seamless integration with various subwoofers, and multiple listening modes to suit various content, from music to movies.

In terms of connectivity, the 970 does not disappoint. It offers an array of inputs and outputs, ensuring compatibility with modern audio and video components. It features multiple HDMI inputs, coaxial and optical digital inputs, as well as analog audio inputs, providing flexibility for connecting different devices. An essential highlight is its acclaimed video processing, which ensures that users can enjoy high-quality video playback, supporting resolutions up to 4K.

The Outlaw 970 also incorporates advanced technologies such as room correction software designed to optimize audio performance based on the acoustics of your listening space. This calibration feature significantly enhances the clarity and coherence of sound, making it ideal for those looking to achieve audio perfection within their home theater setups.

With a user-friendly interface, the Outlaw 970 allows for easy navigation and configuration. The device comes with an intuitive remote control that provides quick access to essential functions, while its front panel offers a straightforward layout for manual adjustments.

In conclusion, the Outlaw Audio Model 970 stands as a premium choice for those seeking a preamp processor that combines high-performance audio processing, robust connectivity, and intelligent calibration technologies. Its dedication to quality audio reproduction and user adaptability makes it a valuable addition to any home theater system.
Top Page Image Contents