Panasonic FZ-A1 Screen Input Operation, Using the Digitizer Pen, Digitizer Calibration

Getting Started

Input Operation

Screen Input Operation

Touch Select items or options.

Touch and hold	Open special options.
Drag	Scroll the screen.
Flick	Scroll the screen
	quickly.

Drag and drop	Move an item.
Pinch	Zoom in or out the
	screen.
	Depending on the
	applications, you can
	also zoom in or out by
	double-touching the
	screen.

Using the Digitizer Pen

You can operate “Touch”, “Touch and hold”, “Drag”, “Flick”, “Drag and drop” and “Double-tap” by using the included digitizer pen instead of your finger.

Without pressing the digitizer button (A): Touch the screen with the digitizer pen.

While pressing the digitizer button (A): Close the digitizer pen to the screen.

B A

CAUTION

The tip of the digitizer pen (B) is equipped with a sensor. Continued applied pressure to the tip may result in its malfunction or degradation. Make sure excessive pressure is not applied to the tip when storing the digitizer pen.

Digitizer Calibration

If necessary, perform the digitizer calibration by following steps below.

Perform the calibration for the orientation to be used.

1Touch - [ Pen Calibration].

2Using the digitizer pen, touch each target one by one.

3Touch [Finished].

Buttons

Select additional functions.

The same function as [ ].

Return to the home screen.

The same function as [ ].

Return to the previous screen.

The same function as [ ].

Press within 1 second :

Enter security mode (sound off, screen off and lock). To return from security mode, press (Power switch).

Press for more than 1 second : Launch “Dashboard”.

Press and hold (USER button), then press (Menu button) within 1 second: Take screenshot

The screenshot data will be stored in the following folder. /sdcard/Pictures/Screenshots/

18