Yamaha HTR-5940 AV Placing the Speakers, Attaching the Stands, Using as Normal Stereo Speakers

Placing the Speakers

Place the speakers on a sturdy, vibration-free surface.

■Using as Normal Stereo Speakers

To get the best stereo performance, angle the speakers inward so as to create a triangle, with the listener at the apex.

Attaching the Stands

When placing the speakers, be sure to use the stands to increase stability.

Use the 8 specified holes located on the base of the speaker.

■Procedure:

1.Put the screw through the inner hole of the stand, and screw it into the outside hole of the speaker. Do not tighten too much at this point.

Outer hole

Inner hole

English

■Using as Front Speakers in a Surround Sound System

Position the speakers both side of your TV. The positioning of these speakers is important because they provide a solid anchor for the sound image. They should be positioned facing the listener at about ear level, and equidistant from the TV.

NS-50F

Surround R

Subwoofer

Center

Surround L

2.Put a screw through the outer hole on the stand, and screw it into the other hole on the base of the speaker.

3.Tighten both of the screws firmly.

4.Attach a pad to the bottom of the end portion of the stand.

5.Attach the other stands to the other corners of the base of the speaker in the same way and confirm that all 4 stands have been firmly attached.

4

1 2

Note:

Be careful not to apply force to the side of the speaker, otherwise the speaker may fall causing damage to the speaker or personal injury.

E-3