Yamaha HTR-5940 AV owner manual Setting the speaker impedance, 2,5 2,4, SP IMP.-8MIN, SP IMP.-6MIN

CONNECTIONS

Setting the speaker impedance

CAUTION

If you are to use 4 or 6 ohm speakers, set “SP IMP.” to “6ΩMIN” as follows BEFORE using this unit.

(U.S.A. model)

									VOLUME
STANDBY
/ON
			PRESET/TUNING	FM/AM	A/B/C/D/E	l PRESET/TUNING/CH h	MEMORY	TUNING MODE
							INPUT
PHONES	SPEAKERS		STRAIGHT	l	PROGRAM h				VIDEO AUX
	A	B				INPUT MODE		MULTI CH
								INPUT
			TONE CONTROL	BASS/TREBLE
SILENT CINEMA								VIDEO	L AUDIO R	PORTABLE

2,5 2,4 3

1Make sure this unit is set to the standby mode.

See page 26 for details about turning on this unit or standby mode.

2Press and hold STRAIGHT (EFFECT) on the front panel and then press STANDBY/ON to turn on this unit.

This unit turns on, and the advanced setup menu appears in the front panel display.

While holding down

STRAIGHT

STANDBY

/ON

EFFECT

3Press PROGRAM l / h buttons on the front panel to select “SP IMP.”.

The following display appears in the front panel display.

l PROGRAM h

SP IMP.-8 MIN

4Press STRAIGHT (EFFECT) on the front panel repeatedly to select “6ΩMIN”.

The following display appears in the front panel display.

STRAIGHT

EFFECT

SP IMP.-6 MIN

5Press STANDBY/ON on the front panel to save the new setting and set this unit to the standby mode.

STANDBY

/ON

Note

The setting you made is reflected next time you turn on this unit.

PREPARATION

25