Yamaha HTR-5940 AV 8Front panel display, 9TUNING MODE AUTO/MAN’L, 0VOLUME, Notes, Dtone Control

8Front panel display

Shows information about the operational status of this unit (see page 9).

9TUNING MODE (AUTO/MAN’L)

Switches between automatic tuning (the AUTO indicator is turned on) and manual tuning (the AUTO indicator is turned off) (see page 44).

0VOLUME

Controls the output level of all audio channels.

y

This does not affect the AUDIO OUT (REC) level.

A PHONES (SILENT CINEMA) jack

Outputs audio signals for private listening with headphones (see page 32).

Notes

•When you connect headphones, no signals are output at the SUBWOOFER OUTPUT jack or the speaker terminals.

•All Dolby Digital and DTS audio signals are mixed down to the left and right headphone channels.

BSPEAKERS A/B buttons

Turns on or off the set of front speakers connected to the A and/or B terminals on the rear panel each time the corresponding button is pressed.

CSTRAIGHT (EFFECT)

Turns the sound field programs off or on. When “STRAIGHT” is selected, 2-channel or multi-channel input signals are output directly from their respective speakers without effect processing (see page 37).

DTONE CONTROL

Selects “BASS” or “TREBLE” to adjust the total balance of the front left and right speakers in conjunction with the BASS/TREBLE +/– buttons (see page 31).

EBASS/TREBLE +/– buttons

Adjust the bass/treble balance of the front left and right speakers in conjunction with TONE CONTROL

(see page 31).

FPROGRAM l / h buttons

Selects sound field programs (see page 62).

GINPUT MODE

Selects either digital or analog input signals exclusively or sets this unit to automatically detect the type of input signals and select the corresponding input signals when one component is connected via both digital and analog connections (see page 33).

HINPUT selector

Selects the desired input source.

CONTROLS AND FUNCTIONS

IMULTI CH INPUT

Selects the input source connected to the MULTI CH INPUT jacks (see page 37).

Note

The input source connected to the MULTI CH INPUT jacks takes priority over the source selected with the INPUT selector on the front panel (or the input selector buttons on the remote control).

JVIDEO AUX jacks

Input audio and video signals from a portable external source such as a game console, a video camera or a portable audio player (see page 22).

y

To reproduce the source signals input at these jacks, select “V-AUX” as the input source.

Note

The audio signals input at the PORTABLE mini jack take priority over the ones input at the AUDIO L/R jacks.

INTRODUCTION

5