WiebeTech SS8 user manual Physical disk, Slot, Size MB, VG Name, Status

Page 19

W i e b e T e c h L L C

4.5.1 Physical disk

Enter Physical disk to view the status of hard disks installed in the system.

Figure 4.5.1.1

(Figure 4.5.2: Physical disks 2 and 3 have been used for a VG named “R0”. Physical disks

1, 5, 6 are free disks. Disk 4 has been set as a global spare disk.)

PD column description:

Slot

WWN

The actual location of hard disks in relation to the

controller. Click next to the slot number to display the details of the hard disk.

World Wide Name. It is created automatically when new hard disk is installed. WWN is a unique identifier for Fibre Channel storage network.

Size (MB)

Capacity of hard disk.

VG Name

Related volume group name.

Status

The status of hard disk.

Æ The hard disk is good. Æ The hard disk has failed.

Status 1

Æ RAID Disk. This hard disk has been set as a member of a RAID array, or a Volume Group.

ProSATA SS8 User Manual

- 19 -

 

 

Image 19
Contents Ultra 320 Scsi to Sata Disk Subsystem ProSATA SS8Copyright@2006, WiebeTech LLC PrefaceAbout this Manual TrademarksGUI Connection Table of ContentsGUI operation Appendix Advanced operationProduct Overview FeaturesTechnical Specifications Requirement Environment SetupBefore installation Package contentsProduct overview Install Sata disksFront view Rear view Connect cables GUI http GUI ConnectionChange IP Config Reset/ShutdownQuick Install View IP SettingProSATA SS8 Menu GUI operationHttp//192.168.0.200 LoginUse the Quick install function to create a volume easily Quick installSystem config IP address PasswordDate Snmp MailEvent log Volume configVG Name Physical diskSlot Size MBPD operations description TotalMB FreeMB Volume groupVG column description NameVG operations description User data groupSizeMB Status UDV column descriptionSizeMB Cache volumeUDV operations description CV column descriptionCV operations description Logical unitLUN operations description Voltage & Temperature SAF-TE configEnclosure management Smart MaintenanceInfo UpgradeShutdown LogoutEnter Volume config Enter Volume group Create volume groupAdvanced operations Enter Volume config Enter User data volume Create user data volumeAttach LUN to UDV Attach and detach Bus ID, Scsi ID, and LUNDetach Bus ID, Scsi ID and LUN from UDV Enter Volume config Enter Logical unitCreate dedicated cache Enter Volume config Enter Cache volumeSet global spare and dedicated spare disks Enter Volume config Enter Physical disk2 a 4-Way RAID 1 array migrates to RAID 3 array Migration / ExpansionE b e T e c h L L C My ProSATA does not mount when I turn it on Appendix a Frequently Asked Questions FAQWay mirroring Appendix B RAID ExplainedRAID 0+1 Host Appendix C GlossarySpare SAF-TE