WiebeTech SS8 user manual Product overview, Install Sata disks, Front view Rear view

Page 8

W i e b e T e c h L L C

2.2 Product overview

Front view

Rear view

Power LED

Access LED

Voltage Switch

Power Switch

RS-232 Port

SCSI to Host

Terminator

Ethernet Port

Power Input

Figure 2.2.1

Figure 2.2.2

WARNING: Before connecting the power cable, make sure the voltage switch is set correctly for your location.

2.3 Install SATA disks

If the hard drives do not come with the RAID system, please follow the instructions for installation below.

•Press the release button and pull the handle to remove the disk tray. The trays may have to be unlocked first using the key provided.

•Insert the disk into the disk tray with the connectors directed toward the open rear of the tray.

•Align the mounting holes of the disk with the tray.

•Mount the disk to the disk tray with the screws provided in the accessory pack.

ProSATA SS8 User Manual	- 8 -

Image 8

Contents ProSATA SS8 Ultra 320 Scsi to Sata Disk SubsystemPreface About this ManualTrademarks Copyright@2006, WiebeTech LLCGUI operation Table of ContentsGUI Connection Advanced operation AppendixFeatures Product OverviewTechnical Specifications Environment Setup Before installationPackage contents RequirementFront view Rear view Install Sata disksProduct overview Connect cables GUI Connection GUI httpReset/Shutdown Quick InstallView IP Setting Change IP ConfigGUI operation ProSATA SS8 MenuLogin Http//192.168.0.200Quick install Use the Quick install function to create a volume easilySystem config Date PasswordIP address Mail SnmpVolume config Event logPhysical disk SlotSize MB VG NamePD operations description Volume group VG column descriptionName TotalMB FreeMBUser data group VG operations descriptionUDV column description SizeMB StatusCache volume UDV operations descriptionCV column description SizeMBLUN operations description Logical unitCV operations description Enclosure management SAF-TE configVoltage & Temperature Maintenance SmartUpgrade InfoLogout ShutdownAdvanced operations Create volume groupEnter Volume config Enter Volume group Create user data volume Enter Volume config Enter User data volumeAttach and detach Bus ID, Scsi ID, and LUN Attach LUN to UDVEnter Volume config Enter Logical unit Detach Bus ID, Scsi ID and LUN from UDVEnter Volume config Enter Cache volume Create dedicated cacheEnter Volume config Enter Physical disk Set global spare and dedicated spare disksMigration / Expansion 2 a 4-Way RAID 1 array migrates to RAID 3 arrayE b e T e c h L L C Appendix a Frequently Asked Questions FAQ My ProSATA does not mount when I turn it onRAID 0+1 Appendix B RAID ExplainedWay mirroring Appendix C Glossary HostSAF-TE Spare