WiebeTech SS8 user manual Connect cables

Page 9

W i e b e T e c h L L C

•Slide the disk tray back into the empty slot of the chassis and make sure the handle clicks into place.

•Lock the tray with key provided to ensure disk security.

Key Lock

Power LED

Access LED

Release

Figure 2.3.1

2.4 Connect cables

Please see Figure 2.2.2 as reference for cable connections.

•Connect power cord.

•Connect SCSI Ultra 320 cable and SCSI Ultra 320 terminator. The ProSATA SS8 controller does not have a terminator on board and will need an external terminator to properly work.

•Connect console cable to the host server (RS-232).

•Connect LAN cable to your existing network setup (hub or switch), or connect console cable (RS-232) to the host server.

ProSATA SS8 User Manual	- 9 -

Image 9

Contents Ultra 320 Scsi to Sata Disk Subsystem ProSATA SS8About this Manual PrefaceTrademarks Copyright@2006, WiebeTech LLCTable of Contents GUI ConnectionGUI operation Appendix Advanced operationProduct Overview FeaturesTechnical Specifications Before installation Environment SetupPackage contents RequirementInstall Sata disks Product overviewFront view Rear view Connect cables GUI http GUI ConnectionQuick Install Reset/ShutdownView IP Setting Change IP ConfigProSATA SS8 Menu GUI operationHttp//192.168.0.200 LoginUse the Quick install function to create a volume easily Quick installSystem config Password IP addressDate Snmp MailEvent log Volume configSlot Physical diskSize MB VG NamePD operations description VG column description Volume groupName TotalMB FreeMBVG operations description User data groupSizeMB Status UDV column descriptionUDV operations description Cache volumeCV column description SizeMBLogical unit CV operations descriptionLUN operations description SAF-TE config Voltage & TemperatureEnclosure management Smart MaintenanceInfo UpgradeShutdown LogoutCreate volume group Enter Volume config Enter Volume groupAdvanced operations Enter Volume config Enter User data volume Create user data volumeAttach LUN to UDV Attach and detach Bus ID, Scsi ID, and LUNDetach Bus ID, Scsi ID and LUN from UDV Enter Volume config Enter Logical unitCreate dedicated cache Enter Volume config Enter Cache volumeSet global spare and dedicated spare disks Enter Volume config Enter Physical disk2 a 4-Way RAID 1 array migrates to RAID 3 array Migration / ExpansionE b e T e c h L L C My ProSATA does not mount when I turn it on Appendix a Frequently Asked Questions FAQAppendix B RAID Explained Way mirroringRAID 0+1 Host Appendix C GlossarySpare SAF-TE