Card
Printer
Solutions
General information
Getting started
Operation
Printing a card
Cleaning
Troubleshooting
Specifications
Appendix A
Appendix B
Appendix C
P320i Plastic Card Printer
PRINTER |
| The following will guide you through the |
INSTALLATION |
| installation of your P320i Printer. |
|
|
|
|
|
|
|
|
|
|
| CAUTION: Limit AC power supplied to the P320i |
|
| |
|
| to 110 ~ 230 volts, 60 ~ 50 Hertz, for an |
|
| associated 800 ~ 400 milliamps. Limit excess |
|
| current draw to 16 amps or less, using an |
|
| associated circuit breaker or other such device. |
|
| Never operate the printer in a location where |
|
| operator, computer, or printer can get wet. |
|
| Personal injury could result. The electrical |
|
| security of the printer is based on the reliability |
|
| of the mains power source. |
|
|
|
1. Place the printer in a location that allows easy access to all sides. The printer should never be operated while resting on its side or upside down.
2. Place the printer's power swith in the OFF (0) position.
3.Insert the power cable into the printer power socket and attach to grounded electrical socket
of the proper voltage and type.
4. Attach interface cable to printer and computer and then secure.
5.Switch power on.
CAUTION: Intermittent or unpredictable operation may occur from unsecured connectors. If damaged, the power cable must be replaced by an exact equivalent.