Card
Printer
Solutions
General information
Getting started
P320i Plastic Card Printer
A - MEDIA LOADING ORIENTATION
Operation
Printing a card
Cleaning Troubleshooting
Specifications
Appendix A
Appendix B
Appendix C
STRIPE
DOWN
STRIPE
UP
NOTE:
M1 = Stripe Down HICO
M2 = Stripe Down LOCO
The magnetic encoder is a factory installed item with the read/write head positioned below the card path, available with HICO encoding (P320i CM1 or P320i CEM1) or LOCO encoding (P320i CM2 or P320i CEM2).
When loading cards into the Card Cartridge, please ensure that the magnetic stripe is facing down and closest to the rear.
Also available are Printer models with the Magnetic Read/Write head positioned above the card path, with HICO encoding (P320i CM3 or P320i CEM3) or LOCO encoding (P320i CM4 or P320i CEM4).
When loading cards, please ensure that the magnetic stripe is facing up and closest to the rear.
M3 = Stripe up HICO
M4 = Stripe up LOCO
Approved HICO & LOCO PVC Cards are available. (See Appendix C).
ONLY USE cards that comply with ISO 7810 & 7811 standards for magnetic stripe cards. The magnetic stripe must be flush to the surface of the card to work properly. Never use