Zebra Technologies P320i user manual Card Thickness Control Lever

Page 17

Card

Printer

Solutions

General information

Getting started

Operation

Printing a card

Cleaning

Troubleshooting

Specifications

Appendix A

Appendix B

Appendix C

P320i Plastic Card Printer

C - CARD THICKNESS CONTROL LEVER

This item is operated by the user to prevent more than one card feeding into the printer at the same time and causing a jam.

Open Cover, and adjust lever to correct position. Repeat for different card thickness. (Factory setting is for 30mil (0.762mm) card thickness. See diagram below:

Card Thickness:

A - 60mil (1.524mm) to 50mil (1.27mm)

B - 40mil (1.016mm) C - 30mil (0.762mm)

* Start at lowest position and move lever up to match card thickness.

For other card thickness, start lever at lowest position and move up until cards feed.

D - CARD OUTPUT HOPPER

For collecting printing cards.

Install Card Output Hopper onto printer by hooking over bottom edge of card exit aperture.

Image 17

Contents P320i Plastic Card Printer Foreword Return Materials AuthorizationCopyright Notice TrademarksPrinters Product Warranty StatementIndustry Canada Notice Declarations of ConformityP320i Printer Models IntroductionP320i Plastic Card Printer Table of contents Trademarks of their respective holders Unpacking Your Card Printer Getting StartedCard Printer InstallationOperation FeaturesP320i Plastic Card Printer General information Card Cartridge Install Card Cleaning Cartridge Card Thickness Control Lever Feeding ONE Card AT a Time Specifications Appendix a Appendix B Appendix CP720 LAM Print a Test CardPrinter Menu information GO to Main Menu Printing a Sample Card P320i Plastic Card Printer Set Printer Driver Options Printing a sample card Protect Your Factory Warranty CleaningCleaning System Cleaning the Print Head Cartridge When to MaintainSlot Screen Message Meaning Action TroubleshootingPrinting Black Magnetic Error Print Quality Issues Poor Print Quality No printing on the card General Colour Printing Bar Codes Fonts Technical SPECIFICATI0NSCard Dimensions P320i Plastic Card Printer Nvironmental Magnetic Card Stripe Encoder Appendix aMedia Loading Orientation ISO Standard Encoding Smart Card Contact Station Appendix BMedia Loading Orientation Acessories & supplies Appendix CR D S Accessories World Wide Sales and Support