HP V4000, dv4000 manual Reverse the above procedure to install the USB board

Removal and Replacement Procedures

7.Remove the PM2.0×4.0 screw 1 that secures the USB board to the frame.

8.Remove the two PM2.5×8.0 screws 2 that secure the USB board to the frame.

9.Lift the rear edge of the USB board 3 until it disengages from the frame.

10.Slide the frame away 4 and remove it.

Removing the USB Board

Reverse the above procedure to install the USB board.

5–66 Maintenance and Service Guide