HP V4000, dv4000 manual Workstation Precautions, Grounding Equipment and Methods

Removal and Replacement Preliminaries

4.6 Workstation Precautions

Use the following grounding precautions at workstations:

■Cover the workstation with approved static-shielding material (refer to Table 4-2,“Static-Shielding Materials”).

■Use a wrist strap connected to a properly grounded work surface and use properly grounded tools and equipment.

■Use conductive field service tools such as cutters, drivers, and vacuums.

■When fixtures must directly contact dissipative surfaces, use fixtures made only of static-safe materials.

■Keep the work area free of nonconductive materials such as ordinary plastic assembly aids and Styrofoam.

■Handle electrostatic-sensitive components, parts, and assemblies by the case or PCM laminate. Handle these items only at static-free workstations.

■Avoid contact with pins, leads, or circuitry.

■Turn off power and input signals before inserting or removing connectors or test equipment.

4.7Grounding Equipment and Methods

Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation.

■When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexible straps with a minimum of one megohm ±10% resistance in the ground cords. To provide proper ground, wear a strap snugly against the skin at all times. On grounded mats with banana-plug connectors, use alligator clips to connect a wrist strap.

4–6 Maintenance and Service Guide