Ready

PRINTER INFO

CLEANING MENU

	Select	Next
	Select	Printer Model Number
		Printer Model Number

		Printer Firmware Version


		Number of impressions


		Reject Box Status
		To show the number of cards remaining in the
		reject box

Select GO TO MAIN MENU	Next

Select	Next
	Next

	CLEAN PRINT HEAD	Select


	To clean the Thermal Print
	To clean the Thermal Print
	Head and card transport system		To run
			cleaning
	CLEAN MAG.HEAD*	Select	cleaning
	CLEAN MAG.HEAD*
	To clean the magnetic
	To clean the magnetic
	Encoder Head

Select	GO TO MAIN MENU	Next
	GO TO MAIN MENU

Select	Next
	TEST PATERN	Select
	To print a printer test card


	PRINT PARAMETERS	Select		To run
	To print a test card showing	Select
	To print a test card showing			printing
	the operating parameter settings of the printers			printing
	the operating parameter settings of the printers


	MAG - PARAMETERS*	Select
	To print a test card showing the operating	Select
	To print a test card showing the operating
	parameter settings of magnetic encoder.
Select		Next
Select	GO TO MAIN MENU	Next
	GO TO MAIN MENU
Select	Next
Select	Ribbon type
	Ribbon type
	To show the type of ribbon installed.
	It may not match the ribbon physically installed
	until the installed ribbon has been selected through
	the driver

Offset X: aa-Y:bb

To show the X print location offset value in pixels (aa)

To show the Y print location offset value in pixels (bb)

Mag. Option: cccc

To show the setting of the magnetic encoder as (cccc), which can be:

-HICO (high coercivity)

-LOCO (low coercivity)

-NONE (no encoder present)

Color Parameters

To show the intensity values of Yellow (Y), Magenta (M) and Cyan (C) panels and contrast value of Black Resin (K) Panel.

Zebra Technologies P420 user manual Ready