B. To install the P420 Printer Driver in Windows NT4.0:
ENSURE THAT YOU HAVE ADMINISTRATIVE PRIVILEGES TO PERFORM THIS INSTALLATION OR CONTACT YOUR IT DEPARTMENT.
Set printer as Not Shared for stand alone use.
Use the steps provided for Windows 95/98 installation with the exception of step 6. where you must type in 'A:\nt40' instead and click OK.
Once the printer driver has been successfully installed, you will need to configure it for your printer. This driver provides control of several printer features when printing from Windows applications. These features are accessed through the P420 Plastic Card Printer Properties. To access these properties select the P420 Card Printer icon in Printers. Then click File Menu and select Properties.
C. Set Printer Driver Options
The P420 Printer screen appears. Change the options as follows:
°On the Printer tab configure the magnetic encoder feature. If your printer is equipped with a Magnetic Encoder option, select With Magnetic Encoder option.
°On the Card tab select card orientation: Landscape or Portrait - Select 'Landscape'.
°On the Ribbon tab, select the Ribbon Type. Select YMCKOK for the standard
°In the same tab, go to Black Panel area and select Text Only. This option allows the text printing using the Black Resin Panel from the Color Ribbon.
°Close the Eltron P420 Printer Properties screen.
Now that you have loaded media and set up the printer driver, the P420 Printer is ready to print.
PRINTING A SAMPLE CARD | 21 |