Zebra Technologies P110I user manual Printing a Test Card, Card Output Hopper

P110i Printer Setup

Printing a Test Card

Card Output Hopper

1.Raise the printer lid and pull the output hopper down to place it in its functional position.

2.When not using the printer, place the card output hopper back in its closed position to protect the printer from dust.

CARD

OUTPUT

HOPPER

Printing a Test Card

With ribbon cartridge and cards loaded, your P110i printer is ready to print. To check the operation of the printer, you should print a test card.

1.Place the printer power switch in the OFF (0) position.

2.While holding down the Multi Function Button, place the printer power switch in the ON ( ) position. The LCD status window will glow blue.

MULTI-FUNCTION	POWER
	SWITCH
SWITCH

P520CEM

Serial N¡ 060376

Firmware: V1.50

Head resistance: 1568

Offset: X002 - Y015

EC: 0014

Printing Counter: 00002716

3.Keep pressing the Multi Function button until the SELF TEST message appears in the window.

4.Release the Multi Function button and a test card will print after a few seconds.

980515-001 Rev. A P110i User’s Manual 21