Zebra Technologies P110I user manual Cleaning System, When to Clean, How to Clean

5

Cleaning

Cleaning System

Caution • PROTECT YOUR FACTORY WARRANTY!

The recommended maintenance procedures must be performed to maintain your factory warranty. Other than the recommended cleaning procedures described in this manual, allow only Zebra authorized technicians to service the P110i Printer.

•NEVER loosen, tighten, adjust, or bend, etc. a part or cable inside the printer.

•NEVER use a high pressure air compressor to remove particles in the printer.

SYour P110i Printer includes a simple cleaning system using Pre-Saturated Cleaning Cards provided. The regular use of these cards will clean and maintain important parts of your printer that cannot be reached: including Print Head, the Transport Rollers, and the Magnetic Encoder Station (optional feature).

When to Clean

After approximately 1000 color cards have been printed, the printer LCD will prompt

CLEAN PRINTER, or when print quality has been degraded.

How to Clean

1.Leave power on.

2.Press and hold the Multi-Function Control Button for 5 seconds.

3.When the cleaning cycle is initiated, the LCD message REMOVE RIBBON THEN CLOSE LID will display.

980515-001 Rev. A P110i User’s Manual 27